diff options
Diffstat (limited to 'doc')
59 files changed, 400 insertions, 257 deletions
diff --git a/doc/Makefile b/doc/Makefile index c29843f303..ecc5e51dd6 100644 --- a/doc/Makefile +++ b/doc/Makefile @@ -2,7 +2,7 @@ BASEDIR = $(CURDIR) CLASSES = $(BASEDIR)/classes/ $(BASEDIR)/../modules/ OUTPUTDIR = $(BASEDIR)/_build TOOLSDIR = $(BASEDIR)/tools -JSDIR = $(BASEDIR)/../platform/javascript +JSDIR = $(BASEDIR)/../platform/web LANGARG ?= en LANGCMD = -l $(LANGARG) diff --git a/doc/classes/@GlobalScope.xml b/doc/classes/@GlobalScope.xml index b2bc926585..71b0901b3d 100644 --- a/doc/classes/@GlobalScope.xml +++ b/doc/classes/@GlobalScope.xml @@ -66,7 +66,7 @@ <description> Returns the arc cosine of [param x] in radians. Use to get the angle of cosine [param x]. [param x] must be between [code]-1.0[/code] and [code]1.0[/code] (inclusive), otherwise, [method acos] will return [constant @GDScript.NAN]. [codeblock] - # c is 0.523599 or 30 degrees if converted with rad2deg(c) + # c is 0.523599 or 30 degrees if converted with rad_to_deg(c) var c = acos(0.866025) [/codeblock] </description> @@ -77,7 +77,7 @@ <description> Returns the arc sine of [param x] in radians. Use to get the angle of sine [param x]. [param x] must be between [code]-1.0[/code] and [code]1.0[/code] (inclusive), otherwise, [method asin] will return [constant @GDScript.NAN]. [codeblock] - # s is 0.523599 or 30 degrees if converted with rad2deg(s) + # s is 0.523599 or 30 degrees if converted with rad_to_deg(s) var s = asin(0.5) [/codeblock] </description> @@ -117,15 +117,15 @@ Returns the point at the given [param t] on a one-dimnesional [url=https://en.wikipedia.org/wiki/B%C3%A9zier_curve]Bezier curve[/url] defined by the given [param control_1], [param control_2], and [param end] points. </description> </method> - <method name="bytes2var"> + <method name="bytes_to_var"> <return type="Variant" /> <param index="0" name="bytes" type="PackedByteArray" /> <description> Decodes a byte array back to a [Variant] value, without decoding objects. - [b]Note:[/b] If you need object deserialization, see [method bytes2var_with_objects]. + [b]Note:[/b] If you need object deserialization, see [method bytes_to_var_with_objects]. </description> </method> - <method name="bytes2var_with_objects"> + <method name="bytes_to_var_with_objects"> <return type="Variant" /> <param index="0" name="bytes" type="PackedByteArray" /> <description> @@ -232,9 +232,9 @@ <description> Returns the cosine of angle [param angle_rad] in radians. [codeblock] - cos(PI * 2) # Returns 1.0 - cos(PI) # Returns -1.0 - cos(deg2rad(90)) # Returns 0.0 + cos(PI * 2) # Returns 1.0 + cos(PI) # Returns -1.0 + cos(deg_to_rad(90)) # Returns 0.0 [/codeblock] </description> </method> @@ -260,6 +260,32 @@ Cubic interpolates between two values by the factor defined in [param weight] with pre and post values. </description> </method> + <method name="cubic_interpolate_angle"> + <return type="float" /> + <param index="0" name="from" type="float" /> + <param index="1" name="to" type="float" /> + <param index="2" name="pre" type="float" /> + <param index="3" name="post" type="float" /> + <param index="4" name="weight" type="float" /> + <description> + Cubic interpolates between two rotation values with shortest path by the factor defined in [param weight] with pre and post values. See also [method lerp_angle]. + </description> + </method> + <method name="cubic_interpolate_angle_in_time"> + <return type="float" /> + <param index="0" name="from" type="float" /> + <param index="1" name="to" type="float" /> + <param index="2" name="pre" type="float" /> + <param index="3" name="post" type="float" /> + <param index="4" name="weight" type="float" /> + <param index="5" name="to_t" type="float" /> + <param index="6" name="pre_t" type="float" /> + <param index="7" name="post_t" type="float" /> + <description> + Cubic interpolates between two rotation values with shortest path by the factor defined in [param weight] with pre and post values. See also [method lerp_angle]. + It can perform smoother interpolation than [code]cubic_interpolate()[/code] by the time values. + </description> + </method> <method name="cubic_interpolate_in_time"> <return type="float" /> <param index="0" name="from" type="float" /> @@ -275,21 +301,21 @@ It can perform smoother interpolation than [code]cubic_interpolate()[/code] by the time values. </description> </method> - <method name="db2linear"> + <method name="db_to_linear"> <return type="float" /> <param index="0" name="db" type="float" /> <description> Converts from decibels to linear energy (audio). </description> </method> - <method name="deg2rad"> + <method name="deg_to_rad"> <return type="float" /> <param index="0" name="deg" type="float" /> <description> Converts an angle expressed in degrees to radians. [codeblock] # r is 3.141593 - var r = deg2rad(180) + var r = deg_to_rad(180) [/codeblock] </description> </method> @@ -513,8 +539,8 @@ extends Sprite var elapsed = 0.0 func _process(delta): - var min_angle = deg2rad(0.0) - var max_angle = deg2rad(90.0) + var min_angle = deg_to_rad(0.0) + var max_angle = deg_to_rad(90.0) rotation = lerp_angle(min_angle, max_angle, elapsed) elapsed += delta [/codeblock] @@ -534,7 +560,7 @@ See also [method inverse_lerp] which performs the reverse of this operation. To perform eased interpolation with [method lerp], combine it with [method ease] or [method smoothstep]. </description> </method> - <method name="linear2db"> + <method name="linear_to_db"> <return type="float" /> <param index="0" name="lin" type="float" /> <description> @@ -543,7 +569,7 @@ # "Slider" refers to a node that inherits Range such as HSlider or VSlider. # Its range must be configured to go from 0 to 1. # Change the bus name if you'd like to change the volume of a specific bus only. - AudioServer.set_bus_volume_db(AudioServer.get_bus_index("Master"), linear2db($Slider.value)) + AudioServer.set_bus_volume_db(AudioServer.get_bus_index("Master"), linear_to_db($Slider.value)) [/codeblock] </description> </method> @@ -787,13 +813,13 @@ [/codeblock] </description> </method> - <method name="rad2deg"> + <method name="rad_to_deg"> <return type="float" /> <param index="0" name="rad" type="float" /> <description> Converts an angle expressed in radians to degrees. [codeblock] - rad2deg(0.523599) # Returns 30 + rad_to_deg(0.523599) # Returns 30 [/codeblock] </description> </method> @@ -974,8 +1000,8 @@ <description> Returns the sine of angle [param angle_rad] in radians. [codeblock] - sin(0.523599) # Returns 0.5 - sin(deg2rad(90)) # Returns 1.0 + sin(0.523599) # Returns 0.5 + sin(deg_to_rad(90)) # Returns 1.0 [/codeblock] </description> </method> @@ -1054,14 +1080,14 @@ Converts one or more arguments of any type to string in the best way possible. </description> </method> - <method name="str2var"> + <method name="str_to_var"> <return type="Variant" /> <param index="0" name="string" type="String" /> <description> - Converts a formatted string that was returned by [method var2str] to the original value. + Converts a formatted [param string] that was returned by [method var_to_str] to the original value. [codeblock] var a = '{ "a": 1, "b": 2 }' - var b = str2var(a) + var b = str_to_var(a) print(b["a"]) # Prints 1 [/codeblock] </description> @@ -1072,7 +1098,7 @@ <description> Returns the tangent of angle [param angle_rad] in radians. [codeblock] - tan(deg2rad(45)) # Returns 1 + tan(deg_to_rad(45)) # Returns 1 [/codeblock] </description> </method> @@ -1103,29 +1129,29 @@ [/codeblock] </description> </method> - <method name="var2bytes"> + <method name="var_to_bytes"> <return type="PackedByteArray" /> <param index="0" name="variable" type="Variant" /> <description> - Encodes a [Variant] value to a byte array, without encoding objects. Deserialization can be done with [method bytes2var]. - [b]Note:[/b] If you need object serialization, see [method var2bytes_with_objects]. + Encodes a [Variant] value to a byte array, without encoding objects. Deserialization can be done with [method bytes_to_var]. + [b]Note:[/b] If you need object serialization, see [method var_to_bytes_with_objects]. </description> </method> - <method name="var2bytes_with_objects"> + <method name="var_to_bytes_with_objects"> <return type="PackedByteArray" /> <param index="0" name="variable" type="Variant" /> <description> - Encodes a [Variant] value to a byte array. Encoding objects is allowed (and can potentially include code). Deserialization can be done with [method bytes2var_with_objects]. + Encodes a [Variant] value to a byte array. Encoding objects is allowed (and can potentially include code). Deserialization can be done with [method bytes_to_var_with_objects]. </description> </method> - <method name="var2str"> + <method name="var_to_str"> <return type="String" /> <param index="0" name="variable" type="Variant" /> <description> - Converts a Variant [param variable] to a formatted string that can later be parsed using [method str2var]. + Converts a Variant [param variable] to a formatted string that can later be parsed using [method str_to_var]. [codeblock] a = { "a": 1, "b": 2 } - print(var2str(a)) + print(var_to_str(a)) [/codeblock] prints [codeblock] @@ -1251,7 +1277,7 @@ </member> <member name="JavaScript" type="JavaScript" setter="" getter=""> The [JavaScript] singleton. - [b]Note:[/b] Only implemented on HTML5. + [b]Note:[/b] Only implemented on the Web platform. </member> <member name="Marshalls" type="Marshalls" setter="" getter=""> The [Marshalls] singleton. @@ -2714,7 +2740,10 @@ <constant name="PROPERTY_HINT_HIDE_QUATERNION_EDIT" value="45" enum="PropertyHint"> Hints that a quaternion property should disable the temporary euler editor. </constant> - <constant name="PROPERTY_HINT_MAX" value="46" enum="PropertyHint"> + <constant name="PROPERTY_HINT_PASSWORD" value="46" enum="PropertyHint"> + Hints that a string property is a password, and every character is replaced with the secret character. + </constant> + <constant name="PROPERTY_HINT_MAX" value="47" enum="PropertyHint"> </constant> <constant name="PROPERTY_USAGE_NONE" value="0" enum="PropertyUsageFlags"> </constant> diff --git a/doc/classes/Animation.xml b/doc/classes/Animation.xml index 8b97fda4d3..df0fb11ac7 100644 --- a/doc/classes/Animation.xml +++ b/doc/classes/Animation.xml @@ -600,6 +600,14 @@ <constant name="INTERPOLATION_CUBIC" value="2" enum="InterpolationType"> Cubic interpolation. </constant> + <constant name="INTERPOLATION_LINEAR_ANGLE" value="3" enum="InterpolationType"> + Linear interpolation with shortest path rotation. + [b]Note:[/b] The result value is always normalized and may not match the key value. + </constant> + <constant name="INTERPOLATION_CUBIC_ANGLE" value="4" enum="InterpolationType"> + Cubic interpolation with shortest path rotation. + [b]Note:[/b] The result value is always normalized and may not match the key value. + </constant> <constant name="UPDATE_CONTINUOUS" value="0" enum="UpdateMode"> Update between keyframes. </constant> diff --git a/doc/classes/AnimationLibrary.xml b/doc/classes/AnimationLibrary.xml index fbbf9a3be4..75fe393dbb 100644 --- a/doc/classes/AnimationLibrary.xml +++ b/doc/classes/AnimationLibrary.xml @@ -22,7 +22,7 @@ <return type="Animation" /> <param index="0" name="name" type="StringName" /> <description> - Returns the [Animation] with the key [param name], or [code]null[/code] if none is found. + Returns the [Animation] with the key [param name]. If the animation does not exist, [code]null[/code] is returned and an error is logged. </description> </method> <method name="get_animation_list" qualifiers="const"> diff --git a/doc/classes/AnimationPlayer.xml b/doc/classes/AnimationPlayer.xml index d771206cc2..710dc55a4b 100644 --- a/doc/classes/AnimationPlayer.xml +++ b/doc/classes/AnimationPlayer.xml @@ -75,7 +75,7 @@ <return type="Animation" /> <param index="0" name="name" type="StringName" /> <description> - Returns the [Animation] with key [param name] or [code]null[/code] if not found. + Returns the [Animation] with the key [param name]. If the animation does not exist, [code]null[/code] is returned and an error is logged. </description> </method> <method name="get_animation_library" qualifiers="const"> diff --git a/doc/classes/CanvasItem.xml b/doc/classes/CanvasItem.xml index 36f49a5a8e..d1fdca5814 100644 --- a/doc/classes/CanvasItem.xml +++ b/doc/classes/CanvasItem.xml @@ -9,7 +9,7 @@ Canvas items are drawn in tree order. By default, children are on top of their parents so a root [CanvasItem] will be drawn behind everything. This behavior can be changed on a per-item basis. A [CanvasItem] can also be hidden, which will also hide its children. It provides many ways to change parameters such as modulation (for itself and its children) and self modulation (only for itself), as well as its blend mode. Ultimately, a transform notification can be requested, which will notify the node that its global position changed in case the parent tree changed. - [b]Note:[/b] Unless otherwise specified, all methods that have angle parameters must have angles specified as [i]radians[/i]. To convert degrees to radians, use [method @GlobalScope.deg2rad]. + [b]Note:[/b] Unless otherwise specified, all methods that have angle parameters must have angles specified as [i]radians[/i]. To convert degrees to radians, use [method @GlobalScope.deg_to_rad]. </description> <tutorials> <link title="Viewport and canvas transforms">$DOCS_URL/tutorials/2d/2d_transforms.html</link> diff --git a/doc/classes/CharacterBody2D.xml b/doc/classes/CharacterBody2D.xml index 2d169904f7..2f8e1a7bb8 100644 --- a/doc/classes/CharacterBody2D.xml +++ b/doc/classes/CharacterBody2D.xml @@ -131,7 +131,7 @@ <method name="move_and_slide"> <return type="bool" /> <description> - Moves the body based on [member velocity]. If the body collides with another, it will slide along the other body (by default only on floor) rather than stop immediately. If the other body is a [CharacterBody2D] or [RigidDynamicBody2D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes. + Moves the body based on [member velocity]. If the body collides with another, it will slide along the other body (by default only on floor) rather than stop immediately. If the other body is a [CharacterBody2D] or [RigidBody2D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes. Modifies [member velocity] if a slide collision occurred. To get the latest collision call [method get_last_slide_collision], for detailed information about collisions that occurred, use [method get_slide_collision]. When the body touches a moving platform, the platform's velocity is automatically added to the body motion. If a collision occurs due to the platform's motion, it will always be first in the slide collisions. The general behavior and available properties change according to the [member motion_mode]. diff --git a/doc/classes/CharacterBody3D.xml b/doc/classes/CharacterBody3D.xml index cbcd6b3af7..6a1975d40f 100644 --- a/doc/classes/CharacterBody3D.xml +++ b/doc/classes/CharacterBody3D.xml @@ -117,7 +117,7 @@ <method name="move_and_slide"> <return type="bool" /> <description> - Moves the body based on [member velocity]. If the body collides with another, it will slide along the other body rather than stop immediately. If the other body is a [CharacterBody3D] or [RigidDynamicBody3D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes. + Moves the body based on [member velocity]. If the body collides with another, it will slide along the other body rather than stop immediately. If the other body is a [CharacterBody3D] or [RigidBody3D], it will also be affected by the motion of the other body. You can use this to make moving and rotating platforms, or to make nodes push other nodes. Modifies [member velocity] if a slide collision occurred. To get the latest collision call [method get_last_slide_collision], for more detailed information about collisions that occurred, use [method get_slide_collision]. When the body touches a moving platform, the platform's velocity is automatically added to the body motion. If a collision occurs due to the platform's motion, it will always be first in the slide collisions. Returns [code]true[/code] if the body collided, otherwise, returns [code]false[/code]. diff --git a/doc/classes/ConcavePolygonShape2D.xml b/doc/classes/ConcavePolygonShape2D.xml index 902993e439..ee3e4f6de4 100644 --- a/doc/classes/ConcavePolygonShape2D.xml +++ b/doc/classes/ConcavePolygonShape2D.xml @@ -4,7 +4,7 @@ Concave polygon shape resource for 2D physics. </brief_description> <description> - 2D concave polygon shape to be added as a [i]direct[/i] child of a [PhysicsBody2D] or [Area2D] using a [CollisionShape2D] node. It is made out of segments and is optimal for complex polygonal concave collisions. However, it is not advised to use for [RigidDynamicBody2D] nodes. A CollisionPolygon2D in convex decomposition mode (solids) or several convex objects are advised for that instead. Otherwise, a concave polygon 2D shape is better for static collisions. + 2D concave polygon shape to be added as a [i]direct[/i] child of a [PhysicsBody2D] or [Area2D] using a [CollisionShape2D] node. It is made out of segments and is optimal for complex polygonal concave collisions. However, it is not advised to use for [RigidBody2D] nodes. A CollisionPolygon2D in convex decomposition mode (solids) or several convex objects are advised for that instead. Otherwise, a concave polygon 2D shape is better for static collisions. The main difference between a [ConvexPolygonShape2D] and a [ConcavePolygonShape2D] is that a concave polygon assumes it is concave and uses a more complex method of collision detection, and a convex one forces itself to be convex to speed up collision detection. [b]Performance:[/b] Due to its complexity, [ConcavePolygonShape2D] is the slowest collision shape to check collisions against. Its use should generally be limited to level geometry. For convex geometry, using [ConvexPolygonShape2D] will perform better. For dynamic physics bodies that need concave collision, several [ConvexPolygonShape2D]s can be used to represent its collision by using convex decomposition; see [ConvexPolygonShape2D]'s documentation for instructions. However, consider using primitive collision shapes such as [CircleShape2D] or [RectangleShape2D] first. [b]Warning:[/b] Using this shape for an [Area2D] (via a [CollisionShape2D] node) may give unexpected results: the area will only detect collisions with the segments in the [ConcavePolygonShape2D] (and not with any "inside" of the shape, for example). diff --git a/doc/classes/ConcavePolygonShape3D.xml b/doc/classes/ConcavePolygonShape3D.xml index d22793e52c..f01ca8efaf 100644 --- a/doc/classes/ConcavePolygonShape3D.xml +++ b/doc/classes/ConcavePolygonShape3D.xml @@ -5,7 +5,7 @@ </brief_description> <description> 3D concave polygon shape resource (also called "trimesh") to be added as a [i]direct[/i] child of a [PhysicsBody3D] or [Area3D] using a [CollisionShape3D] node. This shape is created by feeding a list of triangles. Despite its name, [ConcavePolygonShape3D] can also store convex polygon shapes. However, unlike [ConvexPolygonShape3D], [ConcavePolygonShape3D] is [i]not[/i] limited to storing convex shapes exclusively. - [b]Note:[/b] When used for collision, [ConcavePolygonShape3D] is intended to work with static [PhysicsBody3D] nodes like [StaticBody3D] and will not work with [CharacterBody3D] or [RigidDynamicBody3D] with a mode other than Static. + [b]Note:[/b] When used for collision, [ConcavePolygonShape3D] is intended to work with static [PhysicsBody3D] nodes like [StaticBody3D] and will not work with [CharacterBody3D] or [RigidBody3D] with a mode other than Static. [b]Performance:[/b] Due to its complexity, [ConcavePolygonShape3D] is the slowest collision shape to check collisions against. Its use should generally be limited to level geometry. For convex geometry, using [ConvexPolygonShape3D] will perform better. For dynamic physics bodies that need concave collision, several [ConvexPolygonShape3D]s can be used to represent its collision by using convex decomposition; see [ConvexPolygonShape3D]'s documentation for instructions. However, consider using primitive collision shapes such as [SphereShape3D] or [BoxShape3D] first. [b]Warning:[/b] Using this shape for an [Area3D] (via a [CollisionShape3D] node, created e.g. by using the [i]Create Trimesh Collision Sibling[/i] option in the [i]Mesh[/i] menu that appears when selecting a [MeshInstance3D] node) may give unexpected results: the area will only detect collisions with the triangle faces in the [ConcavePolygonShape3D] (and not with any "inside" of the shape, for example); moreover it will only detect all such collisions if [member backface_collision] is [code]true[/code]. </description> diff --git a/doc/classes/Control.xml b/doc/classes/Control.xml index 8490d79742..0e71dbd0b1 100644 --- a/doc/classes/Control.xml +++ b/doc/classes/Control.xml @@ -154,9 +154,9 @@ <return type="Object" /> <param index="0" name="for_text" type="String" /> <description> - Virtual method to be implemented by the user. Returns a [Control] node that should be used as a tooltip instead of the default one. The [param for_text] includes the contents of the [member hint_tooltip] property. + Virtual method to be implemented by the user. Returns a [Control] node that should be used as a tooltip instead of the default one. The [param for_text] includes the contents of the [member tooltip_text] property. The returned node must be of type [Control] or Control-derived. It can have child nodes of any type. It is freed when the tooltip disappears, so make sure you always provide a new instance (if you want to use a pre-existing node from your scene tree, you can duplicate it and pass the duplicated instance). When [code]null[/code] or a non-Control node is returned, the default tooltip will be used instead. - The returned node will be added as child to a [PopupPanel], so you should only provide the contents of that panel. That [PopupPanel] can be themed using [method Theme.set_stylebox] for the type [code]"TooltipPanel"[/code] (see [member hint_tooltip] for an example). + The returned node will be added as child to a [PopupPanel], so you should only provide the contents of that panel. That [PopupPanel] can be themed using [method Theme.set_stylebox] for the type [code]"TooltipPanel"[/code] (see [member tooltip_text] for an example). [b]Note:[/b] The tooltip is shrunk to minimal size. If you want to ensure it's fully visible, you might want to set its [member custom_minimum_size] to some non-zero value. [b]Note:[/b] The node (and any relevant children) should be [member CanvasItem.visible] when returned, otherwise, the viewport that instantiates it will not be able to calculate its minimum size reliably. Example of usage with a custom-constructed node: @@ -527,7 +527,8 @@ <return type="String" /> <param index="0" name="at_position" type="Vector2" default="Vector2(0, 0)" /> <description> - Returns the tooltip, which will appear when the cursor is resting over this control. See [member hint_tooltip]. + Returns the tooltip text [param at_position] in local coordinates, which will typically appear when the cursor is resting over this control. By default, it returns [member tooltip_text]. + [b]Note:[/b] This method can be overriden to customise its behaviour. If this method returns an empty [String], no tooltip is displayed. </description> </method> <method name="grab_click_focus"> @@ -1005,28 +1006,6 @@ <member name="grow_vertical" type="int" setter="set_v_grow_direction" getter="get_v_grow_direction" enum="Control.GrowDirection" default="1"> Controls the direction on the vertical axis in which the control should grow if its vertical minimum size is changed to be greater than its current size, as the control always has to be at least the minimum size. </member> - <member name="hint_tooltip" type="String" setter="set_tooltip" getter="_get_tooltip" default=""""> - Changes the tooltip text. The tooltip appears when the user's mouse cursor stays idle over this control for a few moments, provided that the [member mouse_filter] property is not [constant MOUSE_FILTER_IGNORE]. You can change the time required for the tooltip to appear with [code]gui/timers/tooltip_delay_sec[/code] option in Project Settings. - The tooltip popup will use either a default implementation, or a custom one that you can provide by overriding [method _make_custom_tooltip]. The default tooltip includes a [PopupPanel] and [Label] whose theme properties can be customized using [Theme] methods with the [code]"TooltipPanel"[/code] and [code]"TooltipLabel"[/code] respectively. For example: - [codeblocks] - [gdscript] - var style_box = StyleBoxFlat.new() - style_box.set_bg_color(Color(1, 1, 0)) - style_box.set_border_width_all(2) - # We assume here that the `theme` property has been assigned a custom Theme beforehand. - theme.set_stylebox("panel", "TooltipPanel", style_box) - theme.set_color("font_color", "TooltipLabel", Color(0, 1, 1)) - [/gdscript] - [csharp] - var styleBox = new StyleBoxFlat(); - styleBox.SetBgColor(new Color(1, 1, 0)); - styleBox.SetBorderWidthAll(2); - // We assume here that the `Theme` property has been assigned a custom Theme beforehand. - Theme.SetStyleBox("panel", "TooltipPanel", styleBox); - Theme.SetColor("font_color", "TooltipLabel", new Color(0, 1, 1)); - [/csharp] - [/codeblocks] - </member> <member name="layout_direction" type="int" setter="set_layout_direction" getter="get_layout_direction" enum="Control.LayoutDirection" default="0"> Controls layout direction and text writing direction. Right-to-left layouts are necessary for certain languages (e.g. Arabic and Hebrew). </member> @@ -1067,7 +1046,7 @@ The node's rotation around its pivot, in radians. See [member pivot_offset] to change the pivot's position. </member> <member name="scale" type="Vector2" setter="set_scale" getter="get_scale" default="Vector2(1, 1)"> - The node's scale, relative to its [member size]. Change this property to scale the node around its [member pivot_offset]. The Control's [member hint_tooltip] will also scale according to this value. + The node's scale, relative to its [member size]. Change this property to scale the node around its [member pivot_offset]. The Control's [member tooltip_text] will also scale according to this value. [b]Note:[/b] This property is mainly intended to be used for animation purposes. Text inside the Control will look pixelated or blurry when the Control is scaled. To support multiple resolutions in your project, use an appropriate viewport stretch mode as described in the [url=$DOCS_URL/tutorials/viewports/multiple_resolutions.html]documentation[/url] instead of scaling Controls individually. [b]Note:[/b] If the Control node is a child of a [Container] node, the scale will be reset to [code]Vector2(1, 1)[/code] when the scene is instantiated. To set the Control's scale when it's instantiated, wait for one frame using [code]await get_tree().process_frame[/code] then set its [member scale] property. </member> @@ -1092,6 +1071,28 @@ [b]Note:[/b] To look up [Control]'s own items use various [code]get_theme_*[/code] methods without specifying [code]theme_type[/code]. [b]Note:[/b] Theme items are looked for in the tree order, from branch to root, where each [Control] node is checked for its [member theme] property. The earliest match against any type/class name is returned. The project-level Theme and the default Theme are checked last. </member> + <member name="tooltip_text" type="String" setter="set_tooltip_text" getter="get_tooltip_text" default=""""> + The default tooltip text. The tooltip appears when the user's mouse cursor stays idle over this control for a few moments, provided that the [member mouse_filter] property is not [constant MOUSE_FILTER_IGNORE]. The time required for the tooltip to appear can be changed with the [code]gui/timers/tooltip_delay_sec[/code] option in Project Settings. See also [method get_tooltip]. + The tooltip popup will use either a default implementation, or a custom one that you can provide by overriding [method _make_custom_tooltip]. The default tooltip includes a [PopupPanel] and [Label] whose theme properties can be customized using [Theme] methods with the [code]"TooltipPanel"[/code] and [code]"TooltipLabel"[/code] respectively. For example: + [codeblocks] + [gdscript] + var style_box = StyleBoxFlat.new() + style_box.set_bg_color(Color(1, 1, 0)) + style_box.set_border_width_all(2) + # We assume here that the `theme` property has been assigned a custom Theme beforehand. + theme.set_stylebox("panel", "TooltipPanel", style_box) + theme.set_color("font_color", "TooltipLabel", Color(0, 1, 1)) + [/gdscript] + [csharp] + var styleBox = new StyleBoxFlat(); + styleBox.SetBgColor(new Color(1, 1, 0)); + styleBox.SetBorderWidthAll(2); + // We assume here that the `Theme` property has been assigned a custom Theme beforehand. + Theme.SetStyleBox("panel", "TooltipPanel", styleBox); + Theme.SetColor("font_color", "TooltipLabel", new Color(0, 1, 1)); + [/csharp] + [/codeblocks] + </member> </members> <signals> <signal name="focus_entered"> diff --git a/doc/classes/DisplayServer.xml b/doc/classes/DisplayServer.xml index bcad75215a..35a2861c54 100644 --- a/doc/classes/DisplayServer.xml +++ b/doc/classes/DisplayServer.xml @@ -760,7 +760,7 @@ <param index="0" name="screen" type="int" default="-1" /> <description> Returns the current refresh rate of the specified screen. If [param screen] is [constant SCREEN_OF_MAIN_WINDOW] (the default value), a screen with the main window will be used. - [b]Note:[/b] Returns [code]-1.0[/code] if the DisplayServer fails to find the refresh rate for the specified screen. On HTML5, [method screen_get_refresh_rate] will always return [code]-1.0[/code] as there is no way to retrieve the refresh rate on that platform. + [b]Note:[/b] Returns [code]-1.0[/code] if the DisplayServer fails to find the refresh rate for the specified screen. On Web, [method screen_get_refresh_rate] will always return [code]-1.0[/code] as there is no way to retrieve the refresh rate on that platform. To fallback to a default refresh rate if the method fails, try: [codeblock] var refresh_rate = DisplayServer.screen_get_refresh_rate() @@ -864,7 +864,7 @@ - [code]name[/code] is voice name. - [code]id[/code] is voice identifier. - [code]language[/code] is language code in [code]lang_Variant[/code] format. [code]lang[/code] part is a 2 or 3-letter code based on the ISO-639 standard, in lowercase. And [code]Variant[/code] part is an engine dependent string describing country, region or/and dialect. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_get_voices_for_language" qualifiers="const"> @@ -872,35 +872,35 @@ <param index="0" name="language" type="String" /> <description> Returns an [PackedStringArray] of voice identifiers for the [param language]. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_is_paused" qualifiers="const"> <return type="bool" /> <description> Returns [code]true[/code] if the synthesizer is in a paused state. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_is_speaking" qualifiers="const"> <return type="bool" /> <description> Returns [code]true[/code] if the synthesizer is generating speech, or have utterance waiting in the queue. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_pause"> <return type="void" /> <description> Puts the synthesizer into a paused state. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_resume"> <return type="void" /> <description> Resumes the synthesizer if it was paused. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_set_utterance_callback"> @@ -912,7 +912,7 @@ - [code]TTS_UTTERANCE_STARTED[/code], [code]TTS_UTTERANCE_ENDED[/code], and [code]TTS_UTTERANCE_CANCELED[/code] callable's method should take one [int] parameter, the utterance id. - [code]TTS_UTTERANCE_BOUNDARY[/code] callable's method should take two [int] parameters, the index of the character and the utterance id. [b]Note:[/b] The granularity of the boundary callbacks is engine dependent. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_speak"> @@ -933,14 +933,14 @@ - [param utterance_id] is passed as a parameter to the callback functions. [b]Note:[/b] On Windows and Linux, utterance [param text] can use SSML markup. SSML support is engine and voice dependent. If the engine does not support SSML, you should strip out all XML markup before calling [method tts_speak]. [b]Note:[/b] The granularity of pitch, rate, and volume is engine and voice dependent. Values may be truncated. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="tts_stop"> <return type="void" /> <description> Stops synthesis in progress and removes all utterances from the queue. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS, and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS, and Windows. </description> </method> <method name="virtual_keyboard_get_height" qualifiers="const"> @@ -971,7 +971,7 @@ [param max_length] limits the number of characters that can be entered if different from [code]-1[/code]. [param cursor_start] can optionally define the current text cursor position if [param cursor_end] is not set. [param cursor_start] and [param cursor_end] can optionally define the current text selection. - [b]Note:[/b] This method is implemented on Android, iOS and HTML5. + [b]Note:[/b] This method is implemented on Android, iOS and Web. </description> </method> <method name="warp_mouse"> @@ -1068,6 +1068,13 @@ <description> </description> </method> + <method name="window_get_safe_title_margins" qualifiers="const"> + <return type="Vector2i" /> + <param index="0" name="window_id" type="int" default="0" /> + <description> + Returns left and right margins of the title that are safe to use (contains no buttons or other elements) when [constant WINDOW_FLAG_EXTEND_TO_TITLE] flag is set. + </description> + </method> <method name="window_get_size" qualifiers="const"> <return type="Vector2i" /> <param index="0" name="window_id" type="int" default="0" /> @@ -1081,6 +1088,20 @@ Returns the V-Sync mode of the given window. </description> </method> + <method name="window_maximize_on_title_dbl_click" qualifiers="const"> + <return type="bool" /> + <description> + Returns [code]true[/code], if double-click on a window title should maximize it. + [b]Note:[/b] This method is implemented on macOS. + </description> + </method> + <method name="window_minimize_on_title_dbl_click" qualifiers="const"> + <return type="bool" /> + <description> + Returns [code]true[/code], if double-click on a window title should minimize it. + [b]Note:[/b] This method is implemented on macOS. + </description> + </method> <method name="window_move_to_foreground"> <return type="void" /> <param index="0" name="window_id" type="int" default="0" /> @@ -1316,6 +1337,9 @@ <constant name="FEATURE_TEXT_TO_SPEECH" value="19" enum="Feature"> Display server supports text-to-speech. See [code]tts_*[/code] methods. </constant> + <constant name="FEATURE_EXTEND_TO_TITLE" value="20" enum="Feature"> + Display server supports expanding window content to the title. See [constant WINDOW_FLAG_EXTEND_TO_TITLE]. + </constant> <constant name="MOUSE_MODE_VISIBLE" value="0" enum="MouseMode"> Makes the mouse cursor visible if it is hidden. </constant> @@ -1372,7 +1396,7 @@ </constant> <constant name="KEYBOARD_TYPE_PASSWORD" value="6" enum="VirtualKeyboardType"> Virtual keyboard for entering a password. On most platforms, this should disable autocomplete and autocapitalization. - [b]Note:[/b] This is not supported on HTML5. Instead, this behaves identically to [constant KEYBOARD_TYPE_DEFAULT]. + [b]Note:[/b] This is not supported on Web. Instead, this behaves identically to [constant KEYBOARD_TYPE_DEFAULT]. </constant> <constant name="KEYBOARD_TYPE_URL" value="7" enum="VirtualKeyboardType"> Virtual keyboard with additional keys to assist with typing URLs. @@ -1446,7 +1470,11 @@ <constant name="WINDOW_FLAG_POPUP" value="5" enum="WindowFlags"> Window is part of menu or [OptionButton] dropdown. This flag can't be changed when window is visible. An active popup window will exclusively receive all input, without stealing focus from its parent. Popup windows are automatically closed when uses click outside it, or when an application is switched. Popup window must have [constant WINDOW_FLAG_TRANSPARENT] set. </constant> - <constant name="WINDOW_FLAG_MAX" value="6" enum="WindowFlags"> + <constant name="WINDOW_FLAG_EXTEND_TO_TITLE" value="6" enum="WindowFlags"> + Window content is expanded to the full size of the window. Unlike borderless window, the frame is left intact and can be used to resize the window, title bar is transparent, but have minimize/maximize/close buttons. + [b]Note:[/b] This flag is implemented on macOS. + </constant> + <constant name="WINDOW_FLAG_MAX" value="7" enum="WindowFlags"> </constant> <constant name="WINDOW_EVENT_MOUSE_ENTER" value="0" enum="WindowEvent"> </constant> @@ -1483,13 +1511,13 @@ Window handle: - Windows: [code]HWND[/code] for the window. - Linux: [code]X11::Window*[/code] for the window. - - MacOS: [code]NSWindow*[/code] for the window. + - macOS: [code]NSWindow*[/code] for the window. - iOS: [code]UIViewController*[/code] for the view controller. - Android: [code]jObject[/code] for the activity. </constant> <constant name="WINDOW_VIEW" value="2" enum="HandleType"> Window view: - - MacOS: [code]NSView*[/code] for the window main view. + - macOS: [code]NSView*[/code] for the window main view. - iOS: [code]UIView*[/code] for the window main view. </constant> <constant name="TTS_UTTERANCE_STARTED" value="0" enum="TTSUtteranceEvent"> diff --git a/doc/classes/EditorProperty.xml b/doc/classes/EditorProperty.xml index 4a6a0e7226..67204f2a15 100644 --- a/doc/classes/EditorProperty.xml +++ b/doc/classes/EditorProperty.xml @@ -44,12 +44,6 @@ Gets the edited property. If your editor is for a single property (added via [method EditorInspectorPlugin._parse_property]), then this will return the property. </description> </method> - <method name="get_tooltip_text" qualifiers="const"> - <return type="String" /> - <description> - Must be implemented to provide a custom tooltip to the property editor. - </description> - </method> <method name="set_bottom_editor"> <return type="void" /> <param index="0" name="editor" type="Control" /> diff --git a/doc/classes/EditorSettings.xml b/doc/classes/EditorSettings.xml index d538a0af2a..56c1f6e55a 100644 --- a/doc/classes/EditorSettings.xml +++ b/doc/classes/EditorSettings.xml @@ -495,6 +495,10 @@ The language to use for the editor interface. Translations are provided by the community. If you spot a mistake, [url=https://docs.godotengine.org/en/latest/community/contributing/editor_and_docs_localization.html]contribute to editor translations on Weblate![/url] </member> + <member name="interface/editor/expand_to_title" type="bool" setter="" getter=""> + Expanding main editor window content to the title, if supported by [DisplayServer]. See [constant DisplayServer.WINDOW_FLAG_EXTEND_TO_TITLE]. + Specific to the macOS platform. + </member> <member name="interface/editor/font_antialiasing" type="int" setter="" getter=""> FreeType's font anti-aliasing mode used to render the editor fonts. Most fonts are not designed to look good with anti-aliasing disabled, so it's recommended to leave this enabled unless you're using a pixel art font. </member> diff --git a/doc/classes/FileDialog.xml b/doc/classes/FileDialog.xml index ba6f4ffb89..43a941c8c8 100644 --- a/doc/classes/FileDialog.xml +++ b/doc/classes/FileDialog.xml @@ -55,7 +55,7 @@ <members> <member name="access" type="int" setter="set_access" getter="get_access" enum="FileDialog.Access" default="0"> The file system access scope. See enum [code]Access[/code] constants. - [b]Warning:[/b] Currently, in sandboxed environments such as HTML5 builds or sandboxed macOS apps, FileDialog cannot access the host file system. See [url=https://github.com/godotengine/godot-proposals/issues/1123]godot-proposals#1123[/url]. + [b]Warning:[/b] Currently, in sandboxed environments such as Web builds or sandboxed macOS apps, FileDialog cannot access the host file system. See [url=https://github.com/godotengine/godot-proposals/issues/1123]godot-proposals#1123[/url]. </member> <member name="current_dir" type="String" setter="set_current_dir" getter="get_current_dir"> The current working directory of the file dialog. diff --git a/doc/classes/GraphEdit.xml b/doc/classes/GraphEdit.xml index e5aa78971e..dc093acdcd 100644 --- a/doc/classes/GraphEdit.xml +++ b/doc/classes/GraphEdit.xml @@ -221,6 +221,9 @@ </method> </methods> <members> + <member name="arrange_nodes_button_hidden" type="bool" setter="set_arrange_nodes_button_hidden" getter="is_arrange_nodes_button_hidden" default="false"> + If [code]true[/code], the Arrange Nodes button is hidden. + </member> <member name="clip_contents" type="bool" setter="set_clip_contents" getter="is_clipping_contents" overrides="Control" default="true" /> <member name="connection_lines_antialiased" type="bool" setter="set_connection_lines_antialiased" getter="is_connection_lines_antialiased" default="true"> If [code]true[/code], the lines between nodes will use antialiasing. diff --git a/doc/classes/GraphNode.xml b/doc/classes/GraphNode.xml index 009c329ee2..ebd4525b19 100644 --- a/doc/classes/GraphNode.xml +++ b/doc/classes/GraphNode.xml @@ -156,7 +156,7 @@ <description> Sets properties of the slot with ID [param idx]. If [param enable_left]/[param enable_right], a port will appear and the slot will be able to be connected from this side. - [param type_left]/[param type_right] is an arbitrary type of the port. Only ports with the same type values can be connected. + [param type_left]/[param type_right] is an arbitrary type of the port. Only ports with the same type values can be connected and negative values will disallow all connections to be made via user inputs. [param color_left]/[param color_right] is the tint of the port's icon on this side. [param custom_left]/[param custom_right] is a custom texture for this side's port. [b]Note:[/b] This method only sets properties of the slot. To create the slot, add a [Control]-derived child to the GraphNode. @@ -208,7 +208,7 @@ <param index="0" name="idx" type="int" /> <param index="1" name="type_left" type="int" /> <description> - Sets the left (input) type of the slot [param idx] to [param type_left]. + Sets the left (input) type of the slot [param idx] to [param type_left]. If the value is negative, all connections will be disallowed to be created via user inputs. </description> </method> <method name="set_slot_type_right"> @@ -216,7 +216,7 @@ <param index="0" name="idx" type="int" /> <param index="1" name="type_right" type="int" /> <description> - Sets the right (output) type of the slot [param idx] to [param type_right]. + Sets the right (output) type of the slot [param idx] to [param type_right]. If the value is negative, all connections will be disallowed to be created via user inputs. </description> </method> </methods> @@ -224,6 +224,9 @@ <member name="comment" type="bool" setter="set_comment" getter="is_comment" default="false"> If [code]true[/code], the GraphNode is a comment node. </member> + <member name="draggable" type="bool" setter="set_draggable" getter="is_draggable" default="true"> + If [code]true[/code], the user can drag the GraphNode. + </member> <member name="language" type="String" setter="set_language" getter="get_language" default=""""> Language code used for line-breaking and text shaping algorithms, if left empty current locale is used instead. </member> @@ -239,6 +242,9 @@ If [code]true[/code], the user can resize the GraphNode. [b]Note:[/b] Dragging the handle will only emit the [signal resize_request] signal, the GraphNode needs to be resized manually. </member> + <member name="selectable" type="bool" setter="set_selectable" getter="is_selectable" default="true"> + If [code]true[/code], the user can select the GraphNode. + </member> <member name="selected" type="bool" setter="set_selected" getter="is_selected" default="false"> If [code]true[/code], the GraphNode is selected. </member> diff --git a/doc/classes/HTTPClient.xml b/doc/classes/HTTPClient.xml index 97178bc94d..332ce9d8f4 100644 --- a/doc/classes/HTTPClient.xml +++ b/doc/classes/HTTPClient.xml @@ -11,7 +11,7 @@ For more information on HTTP, see https://developer.mozilla.org/en-US/docs/Web/HTTP (or read RFC 2616 to get it straight from the source: https://tools.ietf.org/html/rfc2616). [b]Note:[/b] When exporting to Android, make sure to enable the [code]INTERNET[/code] permission in the Android export preset before exporting the project or using one-click deploy. Otherwise, network communication of any kind will be blocked by Android. [b]Note:[/b] It's recommended to use transport encryption (SSL/TLS) and to avoid sending sensitive information (such as login credentials) in HTTP GET URL parameters. Consider using HTTP POST requests or HTTP headers for such information instead. - [b]Note:[/b] When performing HTTP requests from a project exported to HTML5, keep in mind the remote server may not allow requests from foreign origins due to [url=https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS]CORS[/url]. If you host the server in question, you should modify its backend to allow requests from foreign origins by adding the [code]Access-Control-Allow-Origin: *[/code] HTTP header. + [b]Note:[/b] When performing HTTP requests from a project exported to Web, keep in mind the remote server may not allow requests from foreign origins due to [url=https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS]CORS[/url]. If you host the server in question, you should modify its backend to allow requests from foreign origins by adding the [code]Access-Control-Allow-Origin: *[/code] HTTP header. [b]Note:[/b] SSL/TLS support is currently limited to TLS 1.0, TLS 1.1, and TLS 1.2. Attempting to connect to a TLS 1.3-only server will return an error. [b]Warning:[/b] SSL/TLS certificate revocation and certificate pinning are currently not supported. Revoked certificates are accepted as long as they are otherwise valid. If this is a concern, you may want to use automatically managed certificates with a short validity period. </description> diff --git a/doc/classes/Input.xml b/doc/classes/Input.xml index 90da000586..56b95fc755 100644 --- a/doc/classes/Input.xml +++ b/doc/classes/Input.xml @@ -355,7 +355,7 @@ <param index="0" name="duration_ms" type="int" default="500" /> <description> Vibrate handheld devices. - [b]Note:[/b] This method is implemented on Android, iOS, and HTML5. + [b]Note:[/b] This method is implemented on Android, iOS, and Web. [b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] permission in the export preset. [b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and later. [b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not support this method. diff --git a/doc/classes/InputEventWithModifiers.xml b/doc/classes/InputEventWithModifiers.xml index ff2e6409c9..b4a276f6ac 100644 --- a/doc/classes/InputEventWithModifiers.xml +++ b/doc/classes/InputEventWithModifiers.xml @@ -14,13 +14,15 @@ State of the [kbd]Alt[/kbd] modifier. </member> <member name="command_pressed" type="bool" setter="set_command_pressed" getter="is_command_pressed" default="false"> - State of the [kbd]Cmd[/kbd] modifier. + State of the [kbd]Cmd[/kbd] modifier. On macOS, this is equivalent to [member meta_pressed]. On other platforms, this is equivalent to [member ctrl_pressed]. + This modifier should be preferred to [member ctrl_pressed] or [member meta_pressed] for system shortcuts, as it maintains better cross-platform compatibility. </member> <member name="ctrl_pressed" type="bool" setter="set_ctrl_pressed" getter="is_ctrl_pressed" default="false"> State of the [kbd]Ctrl[/kbd] modifier. </member> <member name="meta_pressed" type="bool" setter="set_meta_pressed" getter="is_meta_pressed" default="false"> - State of the [kbd]Meta[/kbd] modifier. + State of the [kbd]Meta[/kbd] modifier. On Windows and Linux, this represents the Windows key (sometimes called "meta" or "super" on Linux). On macOS, this represents the Command key, and is equivalent to [member command_pressed]. + For better cross-system compatibility, use [member command_pressed] instead. </member> <member name="shift_pressed" type="bool" setter="set_shift_pressed" getter="is_shift_pressed" default="false"> State of the [kbd]Shift[/kbd] modifier. diff --git a/doc/classes/JavaScript.xml b/doc/classes/JavaScript.xml index 21eb80155e..c838422e85 100644 --- a/doc/classes/JavaScript.xml +++ b/doc/classes/JavaScript.xml @@ -1,10 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> <class name="JavaScript" inherits="Object" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> - Singleton that connects the engine with the browser's JavaScript context in HTML5 export. + Singleton that connects the engine with the browser's JavaScript context in Web export. </brief_description> <description> - The JavaScript singleton is implemented only in the HTML5 export. It's used to access the browser's JavaScript context. This allows interaction with embedding pages or calling third-party JavaScript APIs. + The JavaScript singleton is implemented only in the Web export. It's used to access the browser's JavaScript context. This allows interaction with embedding pages or calling third-party JavaScript APIs. [b]Note:[/b] This singleton can be disabled at build-time to improve security. By default, the JavaScript singleton is enabled. Official export templates also have the JavaScript singleton enabled. See [url=$DOCS_URL/development/compiling/compiling_for_web.html]Compiling for the Web[/url] in the documentation for more information. </description> <tutorials> diff --git a/doc/classes/JavaScriptObject.xml b/doc/classes/JavaScriptObject.xml index 5c1a37266b..e279acf5a4 100644 --- a/doc/classes/JavaScriptObject.xml +++ b/doc/classes/JavaScriptObject.xml @@ -31,7 +31,7 @@ # [0, 9, [JavaScriptObject:1180]] print(args) [/codeblock] - [b]Note:[/b] Only available in the HTML5 platform. + [b]Note:[/b] Only available in the Web platform. </description> <tutorials> </tutorials> diff --git a/doc/classes/Label.xml b/doc/classes/Label.xml index 0c4c4a5b09..615aceac53 100644 --- a/doc/classes/Label.xml +++ b/doc/classes/Label.xml @@ -5,7 +5,7 @@ </brief_description> <description> Label displays plain text on the screen. It gives you control over the horizontal and vertical alignment and can wrap the text inside the node's bounding rectangle. It doesn't support bold, italics, or other formatting. For that, use [RichTextLabel] instead. - [b]Note:[/b] Contrarily to most other [Control]s, Label's [member Control.mouse_filter] defaults to [constant Control.MOUSE_FILTER_IGNORE] (i.e. it doesn't react to mouse input events). This implies that a label won't display any configured [member Control.hint_tooltip], unless you change its mouse filter. + [b]Note:[/b] Contrarily to most other [Control]s, Label's [member Control.mouse_filter] defaults to [constant Control.MOUSE_FILTER_IGNORE] (i.e. it doesn't react to mouse input events). This implies that a label won't display any configured [member Control.tooltip_text], unless you change its mouse filter. </description> <tutorials> <link title="2D Dodge The Creeps Demo">https://godotengine.org/asset-library/asset/515</link> diff --git a/doc/classes/LineEdit.xml b/doc/classes/LineEdit.xml index 5ca2a22749..f8f2375a71 100644 --- a/doc/classes/LineEdit.xml +++ b/doc/classes/LineEdit.xml @@ -379,7 +379,7 @@ </constant> <constant name="KEYBOARD_TYPE_PASSWORD" value="6" enum="VirtualKeyboardType"> Virtual keyboard for entering a password. On most platforms, this should disable autocomplete and autocapitalization. - [b]Note:[/b] This is not supported on HTML5. Instead, this behaves identically to [constant KEYBOARD_TYPE_DEFAULT]. + [b]Note:[/b] This is not supported on Web. Instead, this behaves identically to [constant KEYBOARD_TYPE_DEFAULT]. </constant> <constant name="KEYBOARD_TYPE_URL" value="7" enum="VirtualKeyboardType"> Virtual keyboard with additional keys to assist with typing URLs. diff --git a/doc/classes/NavigationRegion3D.xml b/doc/classes/NavigationRegion3D.xml index 1e096515be..87e82e7b2e 100644 --- a/doc/classes/NavigationRegion3D.xml +++ b/doc/classes/NavigationRegion3D.xml @@ -18,7 +18,7 @@ <return type="void" /> <param index="0" name="on_thread" type="bool" default="true" /> <description> - Bakes the [NavigationMesh]. If [param on_thread] is set to [code]true[/code] (default), the baking is done on a separate thread. Baking on separate thread is useful because navigation baking is not a cheap operation. When it is completed, it automatically sets the new [NavigationMesh]. Please note that baking on separate thread may be very slow if geometry is parsed from meshes as async access to each mesh involves heavy synchronization. Also, please note that baking on a separate thread is automatically disabled on operating systems that cannot use threads (such as HTML5 with threads disabled). + Bakes the [NavigationMesh]. If [param on_thread] is set to [code]true[/code] (default), the baking is done on a separate thread. Baking on separate thread is useful because navigation baking is not a cheap operation. When it is completed, it automatically sets the new [NavigationMesh]. Please note that baking on separate thread may be very slow if geometry is parsed from meshes as async access to each mesh involves heavy synchronization. Also, please note that baking on a separate thread is automatically disabled on operating systems that cannot use threads (such as Web with threads disabled). </description> </method> <method name="get_navigation_layer_value" qualifiers="const"> diff --git a/doc/classes/Node3D.xml b/doc/classes/Node3D.xml index 53b93beb40..c8e2f1ac68 100644 --- a/doc/classes/Node3D.xml +++ b/doc/classes/Node3D.xml @@ -6,7 +6,7 @@ <description> Most basic 3D game object, with a 3D [Transform3D] and visibility settings. All other 3D game objects inherit from Node3D. Use [Node3D] as a parent node to move, scale, rotate and show/hide children in a 3D project. Affine operations (rotate, scale, translate) happen in parent's local coordinate system, unless the [Node3D] object is set as top-level. Affine operations in this coordinate system correspond to direct affine operations on the [Node3D]'s transform. The word local below refers to this coordinate system. The coordinate system that is attached to the [Node3D] object itself is referred to as object-local coordinate system. - [b]Note:[/b] Unless otherwise specified, all methods that have angle parameters must have angles specified as [i]radians[/i]. To convert degrees to radians, use [method @GlobalScope.deg2rad]. + [b]Note:[/b] Unless otherwise specified, all methods that have angle parameters must have angles specified as [i]radians[/i]. To convert degrees to radians, use [method @GlobalScope.deg_to_rad]. </description> <tutorials> <link title="Introduction to 3D">$DOCS_URL/tutorials/3d/introduction_to_3d.html</link> diff --git a/doc/classes/OS.xml b/doc/classes/OS.xml index e180c73733..13cd9c9ab0 100644 --- a/doc/classes/OS.xml +++ b/doc/classes/OS.xml @@ -297,7 +297,7 @@ On BSD-based operating systems, this is [code]"FreeBSD"[/code], [code]"NetBSD"[/code], [code]"OpenBSD"[/code], or [code]"BSD"[/code] as a fallback. On Android, this is [code]"Android"[/code]. On iOS, this is [code]"iOS"[/code]. - On the web, this is [code]"HTML5"[/code]. + On the web, this is [code]"Web"[/code]. [b]Note:[/b] Custom builds of the engine may support additional platforms, such as consoles, yielding other return values. [codeblocks] [gdscript] @@ -312,7 +312,7 @@ print("Android") "iOS": print("iOS") - "HTML5": + "Web": print("Web") [/gdscript] [csharp] @@ -338,7 +338,7 @@ case "iOS": GD.Print("iOS"); break; - case "HTML5": + case "Web": GD.Print("Web"); break; } @@ -363,7 +363,7 @@ <return type="String" /> <description> Returns the name of the CPU model on the host machine (e.g. "Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz"). - [b]Note:[/b] This method is only implemented on Windows, macOS, Linux and iOS. On Android, HTML5 and UWP, [method get_processor_name] returns an empty string. + [b]Note:[/b] This method is only implemented on Windows, macOS, Linux and iOS. On Android, Web and UWP, [method get_processor_name] returns an empty string. </description> </method> <method name="get_restart_on_exit_arguments" qualifiers="const"> @@ -423,7 +423,7 @@ <description> Returns a string that is unique to the device. [b]Note:[/b] This string may change without notice if the user reinstalls/upgrades their operating system or changes their hardware. This means it should generally not be used to encrypt persistent data as the data saved before an unexpected ID change would become inaccessible. The returned string may also be falsified using external programs, so do not rely on the string returned by [method get_unique_id] for security purposes. - [b]Note:[/b] Returns an empty string on HTML5 and UWP, as this method isn't implemented on those platforms yet. + [b]Note:[/b] Returns an empty string on Web and UWP, as this method isn't implemented on those platforms yet. </description> </method> <method name="get_user_data_dir" qualifiers="const"> @@ -494,7 +494,7 @@ <method name="is_userfs_persistent" qualifiers="const"> <return type="bool" /> <description> - If [code]true[/code], the [code]user://[/code] file system is persistent, so that its state is the same after a player quits and starts the game again. Relevant to the HTML5 platform, where this persistence may be unavailable. + If [code]true[/code], the [code]user://[/code] file system is persistent, so that its state is the same after a player quits and starts the game again. Relevant to the Web platform, where this persistence may be unavailable. </description> </method> <method name="kill"> @@ -610,7 +610,7 @@ - [code]OS.shell_open("https://godotengine.org")[/code] opens the default web browser on the official Godot website. - [code]OS.shell_open("mailto:example@example.com")[/code] opens the default email client with the "To" field set to [code]example@example.com[/code]. See [url=https://datatracker.ietf.org/doc/html/rfc2368]RFC 2368 - The [code]mailto[/code] URL scheme[/url] for a list of fields that can be added. Use [method ProjectSettings.globalize_path] to convert a [code]res://[/code] or [code]user://[/code] path into a system path for use with this method. - [b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS and Windows. + [b]Note:[/b] This method is implemented on Android, iOS, Web, Linux, macOS and Windows. </description> </method> </methods> @@ -627,7 +627,7 @@ The Vulkan rendering backend. It requires Vulkan 1.0 support and automatically uses features from Vulkan 1.1 and 1.2 if available. </constant> <constant name="VIDEO_DRIVER_OPENGL_3" value="1" enum="VideoDriver"> - The OpenGL 3 rendering backend. It uses OpenGL 3.3 Core Profile on desktop platforms, OpenGL ES 3.0 on mobile devices, and WebGL 2.0 on HTML5. + The OpenGL 3 rendering backend. It uses OpenGL 3.3 Core Profile on desktop platforms, OpenGL ES 3.0 on mobile devices, and WebGL 2.0 on Web. </constant> <constant name="DAY_SUNDAY" value="0" enum="Weekday"> Sunday. diff --git a/doc/classes/PackedScene.xml b/doc/classes/PackedScene.xml index c7fe7d8c37..754d3ac73d 100644 --- a/doc/classes/PackedScene.xml +++ b/doc/classes/PackedScene.xml @@ -22,12 +22,12 @@ AddChild(scene); [/csharp] [/codeblocks] - [b]Example of saving a node with different owners:[/b] The following example creates 3 objects: [Node2D] ([code]node[/code]), [RigidDynamicBody2D] ([code]body[/code]) and [CollisionObject2D] ([code]collision[/code]). [code]collision[/code] is a child of [code]body[/code] which is a child of [code]node[/code]. Only [code]body[/code] is owned by [code]node[/code] and [code]pack[/code] will therefore only save those two nodes, but not [code]collision[/code]. + [b]Example of saving a node with different owners:[/b] The following example creates 3 objects: [Node2D] ([code]node[/code]), [RigidBody2D] ([code]body[/code]) and [CollisionObject2D] ([code]collision[/code]). [code]collision[/code] is a child of [code]body[/code] which is a child of [code]node[/code]. Only [code]body[/code] is owned by [code]node[/code] and [code]pack[/code] will therefore only save those two nodes, but not [code]collision[/code]. [codeblocks] [gdscript] # Create the objects. var node = Node2D.new() - var body = RigidDynamicBody2D.new() + var body = RigidBody2D.new() var collision = CollisionShape2D.new() # Create the object hierarchy. @@ -48,7 +48,7 @@ [csharp] // Create the objects. var node = new Node2D(); - var body = new RigidDynamicBody2D(); + var body = new RigidBody2D(); var collision = new CollisionShape2D(); // Create the object hierarchy. diff --git a/doc/classes/ParticleProcessMaterial.xml b/doc/classes/ParticleProcessMaterial.xml index b2dca5a2df..1526658eed 100644 --- a/doc/classes/ParticleProcessMaterial.xml +++ b/doc/classes/ParticleProcessMaterial.xml @@ -409,7 +409,7 @@ No collision for particles. Particles will go through [GPUParticlesCollision3D] nodes. </constant> <constant name="COLLISION_RIGID" value="1" enum="CollisionMode"> - [RigidDynamicBody3D]-style collision for particles using [GPUParticlesCollision3D] nodes. + [RigidBody3D]-style collision for particles using [GPUParticlesCollision3D] nodes. </constant> <constant name="COLLISION_HIDE_ON_CONTACT" value="2" enum="CollisionMode"> Hide particles instantly when colliding with a [GPUParticlesCollision3D] node. This can be combined with a subemitter that uses the [constant COLLISION_RIGID] collision mode to "replace" the parent particle with the subemitter on impact. diff --git a/doc/classes/Performance.xml b/doc/classes/Performance.xml index 92fa1040af..381fa3e9ef 100644 --- a/doc/classes/Performance.xml +++ b/doc/classes/Performance.xml @@ -171,7 +171,7 @@ The amount of render buffer memory used (in bytes). [i]Lower is better.[/i] </constant> <constant name="PHYSICS_2D_ACTIVE_OBJECTS" value="16" enum="Monitor"> - Number of active [RigidDynamicBody2D] nodes in the game. [i]Lower is better.[/i] + Number of active [RigidBody2D] nodes in the game. [i]Lower is better.[/i] </constant> <constant name="PHYSICS_2D_COLLISION_PAIRS" value="17" enum="Monitor"> Number of collision pairs in the 2D physics engine. [i]Lower is better.[/i] @@ -180,7 +180,7 @@ Number of islands in the 2D physics engine. [i]Lower is better.[/i] </constant> <constant name="PHYSICS_3D_ACTIVE_OBJECTS" value="19" enum="Monitor"> - Number of active [RigidDynamicBody3D] and [VehicleBody3D] nodes in the game. [i]Lower is better.[/i] + Number of active [RigidBody3D] and [VehicleBody3D] nodes in the game. [i]Lower is better.[/i] </constant> <constant name="PHYSICS_3D_COLLISION_PAIRS" value="20" enum="Monitor"> Number of collision pairs in the 3D physics engine. [i]Lower is better.[/i] diff --git a/doc/classes/PhysicalBone2D.xml b/doc/classes/PhysicalBone2D.xml index 738568ed03..26fce1a90b 100644 --- a/doc/classes/PhysicalBone2D.xml +++ b/doc/classes/PhysicalBone2D.xml @@ -1,10 +1,10 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="PhysicalBone2D" inherits="RigidDynamicBody2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="PhysicalBone2D" inherits="RigidBody2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> A 2D node that can be used for physically aware bones in 2D. </brief_description> <description> - The [code]PhysicalBone2D[/code] node is a [RigidDynamicBody2D]-based node that can be used to make [Bone2D] nodes in a [Skeleton2D] react to physics. This node is very similar to the [PhysicalBone3D] node, just for 2D instead of 3D. + The [code]PhysicalBone2D[/code] node is a [RigidBody2D]-based node that can be used to make [Bone2D] nodes in a [Skeleton2D] react to physics. This node is very similar to the [PhysicalBone3D] node, just for 2D instead of 3D. [b]Note:[/b] To have the Bone2D nodes visually follow the [code]PhysicalBone2D[/code] node, use a [SkeletonModification2DPhysicalBones] modification on the [Skeleton2D] node with the [Bone2D] nodes. [b]Note:[/b] The PhysicalBone2D node does not automatically create a [Joint2D] node to keep [code]PhysicalBone2D[/code] nodes together. You will need to create these manually. For most cases, you want to use a [PinJoint2D] node. The [code]PhysicalBone2D[/code] node can automatically configure the [Joint2D] node once it's been created as a child node. </description> diff --git a/doc/classes/PhysicsDirectBodyState2D.xml b/doc/classes/PhysicsDirectBodyState2D.xml index 93c9f83ff2..fdc3a44e9d 100644 --- a/doc/classes/PhysicsDirectBodyState2D.xml +++ b/doc/classes/PhysicsDirectBodyState2D.xml @@ -4,7 +4,7 @@ Direct access object to a physics body in the [PhysicsServer2D]. </brief_description> <description> - Provides direct access to a physics body in the [PhysicsServer2D], allowing safe changes to physics properties. This object is passed via the direct state callback of dynamic bodies, and is intended for changing the direct state of that body. See [method RigidDynamicBody2D._integrate_forces]. + Provides direct access to a physics body in the [PhysicsServer2D], allowing safe changes to physics properties. This object is passed via the direct state callback of rigid bodies, and is intended for changing the direct state of that body. See [method RigidBody2D._integrate_forces]. </description> <tutorials> <link title="Physics introduction">$DOCS_URL/tutorials/physics/physics_introduction.html</link> @@ -146,7 +146,7 @@ <return type="int" /> <description> Returns the number of contacts this body has with other bodies. - [b]Note:[/b] By default, this returns 0 unless bodies are configured to monitor contacts. See [member RigidDynamicBody2D.contact_monitor]. + [b]Note:[/b] By default, this returns 0 unless bodies are configured to monitor contacts. See [member RigidBody2D.contact_monitor]. </description> </method> <method name="get_contact_local_normal" qualifiers="const"> diff --git a/doc/classes/PhysicsDirectBodyState3D.xml b/doc/classes/PhysicsDirectBodyState3D.xml index 62eb9f6ac4..efe63e4093 100644 --- a/doc/classes/PhysicsDirectBodyState3D.xml +++ b/doc/classes/PhysicsDirectBodyState3D.xml @@ -4,7 +4,7 @@ Direct access object to a physics body in the [PhysicsServer3D]. </brief_description> <description> - Provides direct access to a physics body in the [PhysicsServer3D], allowing safe changes to physics properties. This object is passed via the direct state callback of dynamic bodies, and is intended for changing the direct state of that body. See [method RigidDynamicBody3D._integrate_forces]. + Provides direct access to a physics body in the [PhysicsServer3D], allowing safe changes to physics properties. This object is passed via the direct state callback of rigid bodies, and is intended for changing the direct state of that body. See [method RigidBody3D._integrate_forces]. </description> <tutorials> <link title="Physics introduction">$DOCS_URL/tutorials/physics/physics_introduction.html</link> @@ -146,7 +146,7 @@ <return type="int" /> <description> Returns the number of contacts this body has with other bodies. - [b]Note:[/b] By default, this returns 0 unless bodies are configured to monitor contacts. See [member RigidDynamicBody3D.contact_monitor]. + [b]Note:[/b] By default, this returns 0 unless bodies are configured to monitor contacts. See [member RigidBody3D.contact_monitor]. </description> </method> <method name="get_contact_impulse" qualifiers="const"> diff --git a/doc/classes/PhysicsServer2D.xml b/doc/classes/PhysicsServer2D.xml index 7ba52c40c6..5ae7423a71 100644 --- a/doc/classes/PhysicsServer2D.xml +++ b/doc/classes/PhysicsServer2D.xml @@ -980,11 +980,11 @@ <constant name="BODY_MODE_KINEMATIC" value="1" enum="BodyMode"> Constant for kinematic bodies. In this mode, a body can be only moved by user code and collides with other bodies along its path. </constant> - <constant name="BODY_MODE_DYNAMIC" value="2" enum="BodyMode"> - Constant for dynamic bodies. In this mode, a body can be pushed by other bodies and has forces applied. + <constant name="BODY_MODE_RIGID" value="2" enum="BodyMode"> + Constant for rigid bodies. In this mode, a body can be pushed by other bodies and has forces applied. </constant> - <constant name="BODY_MODE_DYNAMIC_LINEAR" value="3" enum="BodyMode"> - Constant for linear dynamic bodies. In this mode, a body is dynamic but can not rotate, and only its linear velocity is affected by external forces. + <constant name="BODY_MODE_RIGID_LINEAR" value="3" enum="BodyMode"> + Constant for linear rigid bodies. In this mode, a body can not rotate, and only its linear velocity is affected by external forces. </constant> <constant name="BODY_PARAM_BOUNCE" value="0" enum="BodyParameter"> Constant to set/get a body's bounce factor. diff --git a/doc/classes/PhysicsServer3D.xml b/doc/classes/PhysicsServer3D.xml index d4796fe2cf..da9e10c420 100644 --- a/doc/classes/PhysicsServer3D.xml +++ b/doc/classes/PhysicsServer3D.xml @@ -1340,11 +1340,11 @@ <constant name="BODY_MODE_KINEMATIC" value="1" enum="BodyMode"> Constant for kinematic bodies. In this mode, a body can be only moved by user code and collides with other bodies along its path. </constant> - <constant name="BODY_MODE_DYNAMIC" value="2" enum="BodyMode"> - Constant for dynamic bodies. In this mode, a body can be pushed by other bodies and has forces applied. + <constant name="BODY_MODE_RIGID" value="2" enum="BodyMode"> + Constant for rigid bodies. In this mode, a body can be pushed by other bodies and has forces applied. </constant> - <constant name="BODY_MODE_DYNAMIC_LINEAR" value="3" enum="BodyMode"> - Constant for linear dynamic bodies. In this mode, a body is dynamic but can not rotate, and only its linear velocity is affected by external forces. + <constant name="BODY_MODE_RIGID_LINEAR" value="3" enum="BodyMode"> + Constant for linear rigid bodies. In this mode, a body can not rotate, and only its linear velocity is affected by external forces. </constant> <constant name="BODY_PARAM_BOUNCE" value="0" enum="BodyParameter"> Constant to set/get a body's bounce factor. diff --git a/doc/classes/PopupMenu.xml b/doc/classes/PopupMenu.xml index 0f47bea5df..00b725d5d7 100644 --- a/doc/classes/PopupMenu.xml +++ b/doc/classes/PopupMenu.xml @@ -337,6 +337,7 @@ <param index="0" name="index" type="int" /> <description> Sets the currently focused item as the given [param index]. + Passing [code]-1[/code] as the index makes so that no item is focused. </description> </method> <method name="set_item_accelerator"> diff --git a/doc/classes/ProjectSettings.xml b/doc/classes/ProjectSettings.xml index 29e96c3a9a..8f749f3a37 100644 --- a/doc/classes/ProjectSettings.xml +++ b/doc/classes/ProjectSettings.xml @@ -528,7 +528,7 @@ Position offset for tooltips, relative to the mouse cursor's hotspot. </member> <member name="display/window/dpi/allow_hidpi" type="bool" setter="" getter="" default="true"> - If [code]true[/code], allows HiDPI display on Windows, macOS, Android, iOS and HTML5. If [code]false[/code], the platform's low-DPI fallback will be used on HiDPI displays, which causes the window to be displayed in a blurry or pixelated manner (and can cause various window management bugs). Therefore, it is recommended to make your project scale to [url=$DOCS_URL/tutorials/viewports/multiple_resolutions.html]multiple resolutions[/url] instead of disabling this setting. + If [code]true[/code], allows HiDPI display on Windows, macOS, Android, iOS and Web. If [code]false[/code], the platform's low-DPI fallback will be used on HiDPI displays, which causes the window to be displayed in a blurry or pixelated manner (and can cause various window management bugs). Therefore, it is recommended to make your project scale to [url=$DOCS_URL/tutorials/viewports/multiple_resolutions.html]multiple resolutions[/url] instead of disabling this setting. [b]Note:[/b] This setting has no effect on Linux as DPI-awareness fallbacks are not supported there. </member> <member name="display/window/energy_saving/keep_screen_on" type="bool" setter="" getter="" default="true"> @@ -546,16 +546,16 @@ </member> <member name="display/window/size/always_on_top" type="bool" setter="" getter="" default="false"> Forces the main window to be always on top. - [b]Note:[/b] This setting is ignored on iOS, Android, and HTML5. + [b]Note:[/b] This setting is ignored on iOS, Android, and Web. </member> <member name="display/window/size/borderless" type="bool" setter="" getter="" default="false"> Forces the main window to be borderless. - [b]Note:[/b] This setting is ignored on iOS, Android, and HTML5. + [b]Note:[/b] This setting is ignored on iOS, Android, and Web. </member> <member name="display/window/size/fullscreen" type="bool" setter="" getter="" default="false"> Sets the main window to full screen when the project starts. Note that this is not [i]exclusive[/i] fullscreen. On Windows and Linux, a borderless window is used to emulate fullscreen. On macOS, a new desktop is used to display the running project. Regardless of the platform, enabling fullscreen will change the window size to match the monitor's size. Therefore, make sure your project supports [url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]multiple resolutions[/url] when enabling fullscreen mode. - [b]Note:[/b] This setting is ignored on iOS, Android, and HTML5. + [b]Note:[/b] This setting is ignored on iOS, Android, and Web. </member> <member name="display/window/size/resizable" type="bool" setter="" getter="" default="true"> Allows the window to be resizable by default. @@ -569,11 +569,11 @@ </member> <member name="display/window/size/window_height_override" type="int" setter="" getter="" default="0"> On desktop platforms, overrides the game's initial window height. See also [member display/window/size/window_width_override], [member display/window/size/viewport_width] and [member display/window/size/viewport_height]. - [b]Note:[/b] By default, or when set to [code]0[/code], the initial window height is the [member display/window/size/viewport_height]. This setting is ignored on iOS, Android, and HTML5. + [b]Note:[/b] By default, or when set to [code]0[/code], the initial window height is the [member display/window/size/viewport_height]. This setting is ignored on iOS, Android, and Web. </member> <member name="display/window/size/window_width_override" type="int" setter="" getter="" default="0"> On desktop platforms, overrides the game's initial window width. See also [member display/window/size/window_height_override], [member display/window/size/viewport_width] and [member display/window/size/viewport_height]. - [b]Note:[/b] By default, or when set to [code]0[/code], the initial window width is the viewport [member display/window/size/viewport_width]. This setting is ignored on iOS, Android, and HTML5. + [b]Note:[/b] By default, or when set to [code]0[/code], the initial window width is the viewport [member display/window/size/viewport_width]. This setting is ignored on iOS, Android, and Web. </member> <member name="display/window/vsync/vsync_mode" type="int" setter="" getter="" default="1"> Sets the V-Sync mode for the main game window. @@ -1643,13 +1643,13 @@ Sets the number of MSAA samples to use (as a power of two). MSAA is used to reduce aliasing around the edges of polygons. A higher MSAA value results in smoother edges but can be significantly slower on some hardware. See also bilinear scaling 3d [member rendering/scaling_3d/mode] for supersampling, which provides higher quality but is much more expensive. </member> <member name="rendering/anti_aliasing/quality/screen_space_aa" type="int" setter="" getter="" default="0"> - Sets the screen-space antialiasing mode for the default screen [Viewport]. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. The blurriness can be counteracted to an extent by using a negative mipmap LOD bias ([member rendering/textures/default_filters/texture_mipmap_bias]). + Sets the screen-space antialiasing mode for the default screen [Viewport]. Screen-space antialiasing works by selectively blurring edges in a post-process shader. It differs from MSAA which takes multiple coverage samples while rendering objects. Screen-space AA methods are typically faster than MSAA and will smooth out specular aliasing, but tend to make scenes appear blurry. The blurriness is partially counteracted by automatically using a negative mipmap LOD bias (see [member rendering/textures/default_filters/texture_mipmap_bias]). Another way to combat specular aliasing is to enable [member rendering/anti_aliasing/screen_space_roughness_limiter/enabled]. </member> <member name="rendering/anti_aliasing/quality/use_debanding" type="bool" setter="" getter="" default="false"> </member> <member name="rendering/anti_aliasing/quality/use_taa" type="bool" setter="" getter="" default="false"> - Enables Temporal Anti-Aliasing for the default screen [Viewport]. TAA works by jittering the camera and accumulating the images of the last rendered frames, motion vector rendering is used to account for camera and object motion. Enabling TAA can make the image blurrier, which can be counteracted to an extent by using a negative mipmap LOD bias ([member rendering/textures/default_filters/texture_mipmap_bias]). + Enables Temporal Anti-Aliasing for the default screen [Viewport]. TAA works by jittering the camera and accumulating the images of the last rendered frames, motion vector rendering is used to account for camera and object motion. Enabling TAA can make the image blurrier, which is partially counteracted by automatically using a negative mipmap LOD bias (see [member rendering/textures/default_filters/texture_mipmap_bias]). [b]Note:[/b] The implementation is not complete yet, some visual instances such as particles and skinned meshes may show artifacts. </member> <member name="rendering/anti_aliasing/screen_space_roughness_limiter/amount" type="float" setter="" getter="" default="0.25"> @@ -1952,7 +1952,8 @@ [b]Note:[/b] This property is only read when the project starts. There is currently no way to change this setting at run-time. </member> <member name="rendering/textures/default_filters/texture_mipmap_bias" type="float" setter="" getter="" default="0.0"> - Affects the final texture sharpness by reading from a lower or higher mipmap (also called "texture LOD bias"). Negative values make mipmapped textures sharper but grainier when viewed at a distance, while positive values make mipmapped textures blurrier (even when up close). To get sharper textures at a distance without introducing too much graininess, set this between [code]-0.75[/code] and [code]0.0[/code]. Enabling temporal antialiasing ([member rendering/anti_aliasing/quality/use_taa]) can help reduce the graininess visible when using negative mipmap bias. + Affects the final texture sharpness by reading from a lower or higher mipmap (also called "texture LOD bias"). Negative values make mipmapped textures sharper but grainier when viewed at a distance, while positive values make mipmapped textures blurrier (even when up close). + Enabling temporal antialiasing ([member rendering/anti_aliasing/quality/use_taa]) will automatically apply a [code]-0.5[/code] offset to this value, while enabling FXAA ([member rendering/anti_aliasing/quality/screen_space_aa]) will automatically apply a [code]-0.25[/code] offset to this value. If both TAA and FXAA are enbled at the same time, an offset of [code]-0.75[/code] is applied to this value. [b]Note:[/b] If [member rendering/scaling_3d/scale] is lower than [code]1.0[/code] (exclusive), [member rendering/textures/default_filters/texture_mipmap_bias] is used to adjust the automatic mipmap bias which is calculated internally based on the scale factor. The formula for this is [code]log2(scaling_3d_scale) + mipmap_bias[/code]. [b]Note:[/b] This property is only read when the project starts. To change the mipmap LOD bias at run-time, set [member Viewport.texture_mipmap_bias] instead. </member> diff --git a/doc/classes/RigidDynamicBody2D.xml b/doc/classes/RigidBody2D.xml index 1434affee1..9eedc3a24c 100644 --- a/doc/classes/RigidDynamicBody2D.xml +++ b/doc/classes/RigidBody2D.xml @@ -1,12 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="RigidDynamicBody2D" inherits="PhysicsBody2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="RigidBody2D" inherits="PhysicsBody2D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> Physics Body which is moved by 2D physics simulation. Useful for objects that have gravity and can be pushed by other objects. </brief_description> <description> - This node implements simulated 2D physics. You do not control a RigidDynamicBody2D directly. Instead, you apply forces to it (gravity, impulses, etc.) and the physics simulation calculates the resulting movement based on its mass, friction, and other physical properties. + This node implements simulated 2D physics. You do not control a RigidBody2D directly. Instead, you apply forces to it (gravity, impulses, etc.) and the physics simulation calculates the resulting movement based on its mass, friction, and other physical properties. You can switch the body's behavior using [member lock_rotation], [member freeze], and [member freeze_mode]. - [b]Note:[/b] You should not change a RigidDynamicBody2D's [code]position[/code] or [code]linear_velocity[/code] every frame or even very often. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state. + [b]Note:[/b] You should not change a RigidBody2D's [code]position[/code] or [code]linear_velocity[/code] every frame or even very often. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state. Please also keep in mind that physics bodies manage their own transform which overwrites the ones you set. So any direct or indirect transformation (including scaling of the node or its parent) will be visible in the editor only, and immediately reset at runtime. If you need to override the default physics behavior or add a transformation at runtime, you can write a custom force integration. See [member custom_integrator]. </description> @@ -124,7 +124,7 @@ Damps the body's rotation. By default, the body will use the [b]Default Angular Damp[/b] in [b]Project > Project Settings > Physics > 2d[/b] or any value override set by an [Area2D] the body is in. Depending on [member angular_damp_mode], you can set [member angular_damp] to be added to or to replace the body's damping value. See [member ProjectSettings.physics/2d/default_angular_damp] for more details about damping. </member> - <member name="angular_damp_mode" type="int" setter="set_angular_damp_mode" getter="get_angular_damp_mode" enum="RigidDynamicBody2D.DampMode" default="0"> + <member name="angular_damp_mode" type="int" setter="set_angular_damp_mode" getter="get_angular_damp_mode" enum="RigidBody2D.DampMode" default="0"> Defines how [member angular_damp] is applied. See [enum DampMode] for possible values. </member> <member name="angular_velocity" type="float" setter="set_angular_velocity" getter="get_angular_velocity" default="0.0"> @@ -137,7 +137,7 @@ The body's custom center of mass, relative to the body's origin position, when [member center_of_mass_mode] is set to [constant CENTER_OF_MASS_MODE_CUSTOM]. This is the balanced point of the body, where applied forces only cause linear acceleration. Applying forces outside of the center of mass causes angular acceleration. When [member center_of_mass_mode] is set to [constant CENTER_OF_MASS_MODE_AUTO] (default value), the center of mass is automatically computed. </member> - <member name="center_of_mass_mode" type="int" setter="set_center_of_mass_mode" getter="get_center_of_mass_mode" enum="RigidDynamicBody2D.CenterOfMassMode" default="0"> + <member name="center_of_mass_mode" type="int" setter="set_center_of_mass_mode" getter="get_center_of_mass_mode" enum="RigidBody2D.CenterOfMassMode" default="0"> Defines the way the body's center of mass is set. See [enum CenterOfMassMode] for possible values. </member> <member name="constant_force" type="Vector2" setter="set_constant_force" getter="get_constant_force" default="Vector2(0, 0)"> @@ -149,10 +149,10 @@ See [method add_constant_torque]. </member> <member name="contact_monitor" type="bool" setter="set_contact_monitor" getter="is_contact_monitor_enabled" default="false"> - If [code]true[/code], the RigidDynamicBody2D will emit signals when it collides with another RigidDynamicBody2D. + If [code]true[/code], the RigidBody2D will emit signals when it collides with another RigidBody2D. [b]Note:[/b] By default the maximum contacts reported is set to 0, meaning nothing will be recorded, see [member max_contacts_reported]. </member> - <member name="continuous_cd" type="int" setter="set_continuous_collision_detection_mode" getter="get_continuous_collision_detection_mode" enum="RigidDynamicBody2D.CCDMode" default="0"> + <member name="continuous_cd" type="int" setter="set_continuous_collision_detection_mode" getter="get_continuous_collision_detection_mode" enum="RigidBody2D.CCDMode" default="0"> Continuous collision detection mode. Continuous collision detection tries to predict where a moving body will collide instead of moving it and correcting its movement after collision. Continuous collision detection is slower, but more precise and misses fewer collisions with small, fast-moving objects. Raycasting and shapecasting methods are available. See [enum CCDMode] for details. </member> @@ -164,7 +164,7 @@ See [member freeze_mode] to set the body's behavior when frozen. For a body that is always frozen, use [StaticBody2D] or [AnimatableBody2D] instead. </member> - <member name="freeze_mode" type="int" setter="set_freeze_mode" getter="get_freeze_mode" enum="RigidDynamicBody2D.FreezeMode" default="0"> + <member name="freeze_mode" type="int" setter="set_freeze_mode" getter="get_freeze_mode" enum="RigidBody2D.FreezeMode" default="0"> The body's freeze mode. Can be used to set the body's behavior when [member freeze] is enabled. See [enum FreezeMode] for possible values. For a body that is always frozen, use [StaticBody2D] or [AnimatableBody2D] instead. </member> @@ -179,7 +179,7 @@ Damps the body's movement. By default, the body will use the [b]Default Linear Damp[/b] in [b]Project > Project Settings > Physics > 2d[/b] or any value override set by an [Area2D] the body is in. Depending on [member linear_damp_mode], you can set [member linear_damp] to be added to or to replace the body's damping value. See [member ProjectSettings.physics/2d/default_linear_damp] for more details about damping. </member> - <member name="linear_damp_mode" type="int" setter="set_linear_damp_mode" getter="get_linear_damp_mode" enum="RigidDynamicBody2D.DampMode" default="0"> + <member name="linear_damp_mode" type="int" setter="set_linear_damp_mode" getter="get_linear_damp_mode" enum="RigidBody2D.DampMode" default="0"> Defines how [member linear_damp] is applied. See [enum DampMode] for possible values. </member> <member name="linear_velocity" type="Vector2" setter="set_linear_velocity" getter="get_linear_velocity" default="Vector2(0, 0)"> @@ -224,11 +224,11 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of this RigidDynamicBody2D's [Shape2D]s collides with another [PhysicsBody2D] or [TileMap]'s [Shape2D]s. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. + Emitted when one of this RigidBody2D's [Shape2D]s collides with another [PhysicsBody2D] or [TileMap]'s [Shape2D]s. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. [param body_rid] the [RID] of the other [PhysicsBody2D] or [TileSet]'s [CollisionObject2D] used by the [PhysicsServer2D]. [param body] the [Node], if it exists in the tree, of the other [PhysicsBody2D] or [TileMap]. [param body_shape_index] the index of the [Shape2D] of the other [PhysicsBody2D] or [TileMap] used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape2D] of this RigidDynamicBody2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + [param local_shape_index] the index of the [Shape2D] of this RigidBody2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. </description> </signal> <signal name="body_shape_exited"> @@ -237,11 +237,11 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when the collision between one of this RigidDynamicBody2D's [Shape2D]s and another [PhysicsBody2D] or [TileMap]'s [Shape2D]s ends. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. + Emitted when the collision between one of this RigidBody2D's [Shape2D]s and another [PhysicsBody2D] or [TileMap]'s [Shape2D]s ends. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [TileMap]s are detected if the [TileSet] has Collision [Shape2D]s. [param body_rid] the [RID] of the other [PhysicsBody2D] or [TileSet]'s [CollisionObject2D] used by the [PhysicsServer2D]. [param body] the [Node], if it exists in the tree, of the other [PhysicsBody2D] or [TileMap]. [param body_shape_index] the index of the [Shape2D] of the other [PhysicsBody2D] or [TileMap] used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape2D] of this RigidDynamicBody2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + [param local_shape_index] the index of the [Shape2D] of this RigidBody2D used by the [PhysicsServer2D]. Get the [CollisionShape2D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. </description> </signal> <signal name="sleeping_state_changed"> diff --git a/doc/classes/RigidDynamicBody3D.xml b/doc/classes/RigidBody3D.xml index fb747177ae..3ee3f25df1 100644 --- a/doc/classes/RigidDynamicBody3D.xml +++ b/doc/classes/RigidBody3D.xml @@ -1,12 +1,12 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="RigidDynamicBody3D" inherits="PhysicsBody3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="RigidBody3D" inherits="PhysicsBody3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> Physics Body which is moved by 3D physics simulation. Useful for objects that have gravity and can be pushed by other objects. </brief_description> <description> - This is the node that implements full 3D physics. This means that you do not control a RigidDynamicBody3D directly. Instead, you can apply forces to it (gravity, impulses, etc.), and the physics simulation will calculate the resulting movement, collision, bouncing, rotating, etc. + This is the node that implements full 3D physics. This means that you do not control a RigidBody3D directly. Instead, you can apply forces to it (gravity, impulses, etc.), and the physics simulation will calculate the resulting movement, collision, bouncing, rotating, etc. You can switch the body's behavior using [member lock_rotation], [member freeze], and [member freeze_mode]. - [b]Note:[/b] Don't change a RigidDynamicBody3D's position every frame or very often. Sporadic changes work fine, but physics runs at a different granularity (fixed Hz) than usual rendering (process callback) and maybe even in a separate thread, so changing this from a process loop may result in strange behavior. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state. + [b]Note:[/b] Don't change a RigidBody3D's position every frame or very often. Sporadic changes work fine, but physics runs at a different granularity (fixed Hz) than usual rendering (process callback) and maybe even in a separate thread, so changing this from a process loop may result in strange behavior. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state. If you need to override the default physics behavior, you can write a custom force integration function. See [member custom_integrator]. </description> <tutorials> @@ -114,7 +114,7 @@ <method name="get_inverse_inertia_tensor" qualifiers="const"> <return type="Basis" /> <description> - Returns the inverse inertia tensor basis. This is used to calculate the angular acceleration resulting from a torque applied to the [RigidDynamicBody3D]. + Returns the inverse inertia tensor basis. This is used to calculate the angular acceleration resulting from a torque applied to the [RigidBody3D]. </description> </method> <method name="set_axis_velocity"> @@ -130,11 +130,11 @@ Damps the body's rotation. By default, the body will use the [b]Default Angular Damp[/b] in [b]Project > Project Settings > Physics > 3d[/b] or any value override set by an [Area3D] the body is in. Depending on [member angular_damp_mode], you can set [member angular_damp] to be added to or to replace the body's damping value. See [member ProjectSettings.physics/3d/default_angular_damp] for more details about damping. </member> - <member name="angular_damp_mode" type="int" setter="set_angular_damp_mode" getter="get_angular_damp_mode" enum="RigidDynamicBody3D.DampMode" default="0"> + <member name="angular_damp_mode" type="int" setter="set_angular_damp_mode" getter="get_angular_damp_mode" enum="RigidBody3D.DampMode" default="0"> Defines how [member angular_damp] is applied. See [enum DampMode] for possible values. </member> <member name="angular_velocity" type="Vector3" setter="set_angular_velocity" getter="get_angular_velocity" default="Vector3(0, 0, 0)"> - The RigidDynamicBody3D's rotational velocity in [i]radians[/i] per second. + The RigidBody3D's rotational velocity in [i]radians[/i] per second. </member> <member name="can_sleep" type="bool" setter="set_can_sleep" getter="is_able_to_sleep" default="true"> If [code]true[/code], the body can enter sleep mode when there is no movement. See [member sleeping]. @@ -143,7 +143,7 @@ The body's custom center of mass, relative to the body's origin position, when [member center_of_mass_mode] is set to [constant CENTER_OF_MASS_MODE_CUSTOM]. This is the balanced point of the body, where applied forces only cause linear acceleration. Applying forces outside of the center of mass causes angular acceleration. When [member center_of_mass_mode] is set to [constant CENTER_OF_MASS_MODE_AUTO] (default value), the center of mass is automatically computed. </member> - <member name="center_of_mass_mode" type="int" setter="set_center_of_mass_mode" getter="get_center_of_mass_mode" enum="RigidDynamicBody3D.CenterOfMassMode" default="0"> + <member name="center_of_mass_mode" type="int" setter="set_center_of_mass_mode" getter="get_center_of_mass_mode" enum="RigidBody3D.CenterOfMassMode" default="0"> Defines the way the body's center of mass is set. See [enum CenterOfMassMode] for possible values. </member> <member name="constant_force" type="Vector3" setter="set_constant_force" getter="get_constant_force" default="Vector3(0, 0, 0)"> @@ -155,7 +155,7 @@ See [method add_constant_torque]. </member> <member name="contact_monitor" type="bool" setter="set_contact_monitor" getter="is_contact_monitor_enabled" default="false"> - If [code]true[/code], the RigidDynamicBody3D will emit signals when it collides with another RigidDynamicBody3D. + If [code]true[/code], the RigidBody3D will emit signals when it collides with another RigidBody3D. [b]Note:[/b] By default the maximum contacts reported is set to 0, meaning nothing will be recorded, see [member max_contacts_reported]. </member> <member name="continuous_cd" type="bool" setter="set_use_continuous_collision_detection" getter="is_using_continuous_collision_detection" default="false"> @@ -170,12 +170,12 @@ See [member freeze_mode] to set the body's behavior when frozen. For a body that is always frozen, use [StaticBody3D] or [AnimatableBody3D] instead. </member> - <member name="freeze_mode" type="int" setter="set_freeze_mode" getter="get_freeze_mode" enum="RigidDynamicBody3D.FreezeMode" default="0"> + <member name="freeze_mode" type="int" setter="set_freeze_mode" getter="get_freeze_mode" enum="RigidBody3D.FreezeMode" default="0"> The body's freeze mode. Can be used to set the body's behavior when [member freeze] is enabled. See [enum FreezeMode] for possible values. For a body that is always frozen, use [StaticBody3D] or [AnimatableBody3D] instead. </member> <member name="gravity_scale" type="float" setter="set_gravity_scale" getter="get_gravity_scale" default="1.0"> - This is multiplied by the global 3D gravity setting found in [b]Project > Project Settings > Physics > 3d[/b] to produce RigidDynamicBody3D's gravity. For example, a value of 1 will be normal gravity, 2 will apply double gravity, and 0.5 will apply half gravity to this object. + This is multiplied by the global 3D gravity setting found in [b]Project > Project Settings > Physics > 3d[/b] to produce RigidBody3D's gravity. For example, a value of 1 will be normal gravity, 2 will apply double gravity, and 0.5 will apply half gravity to this object. </member> <member name="inertia" type="Vector3" setter="set_inertia" getter="get_inertia" default="Vector3(0, 0, 0)"> The body's moment of inertia. This is like mass, but for rotation: it determines how much torque it takes to rotate the body on each axis. The moment of inertia is usually computed automatically from the mass and the shapes, but this property allows you to set a custom value. @@ -185,7 +185,7 @@ Damps the body's movement. By default, the body will use the [b]Default Linear Damp[/b] in [b]Project > Project Settings > Physics > 3d[/b] or any value override set by an [Area3D] the body is in. Depending on [member linear_damp_mode], you can set [member linear_damp] to be added to or to replace the body's damping value. See [member ProjectSettings.physics/3d/default_linear_damp] for more details about damping. </member> - <member name="linear_damp_mode" type="int" setter="set_linear_damp_mode" getter="get_linear_damp_mode" enum="RigidDynamicBody3D.DampMode" default="0"> + <member name="linear_damp_mode" type="int" setter="set_linear_damp_mode" getter="get_linear_damp_mode" enum="RigidBody3D.DampMode" default="0"> Defines how [member linear_damp] is applied. See [enum DampMode] for possible values. </member> <member name="linear_velocity" type="Vector3" setter="set_linear_velocity" getter="get_linear_velocity" default="Vector3(0, 0, 0)"> @@ -230,11 +230,11 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when one of this RigidDynamicBody3D's [Shape3D]s collides with another [PhysicsBody3D] or [GridMap]'s [Shape3D]s. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. + Emitted when one of this RigidBody3D's [Shape3D]s collides with another [PhysicsBody3D] or [GridMap]'s [Shape3D]s. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. [param body_rid] the [RID] of the other [PhysicsBody3D] or [MeshLibrary]'s [CollisionObject3D] used by the [PhysicsServer3D]. [param body] the [Node], if it exists in the tree, of the other [PhysicsBody3D] or [GridMap]. [param body_shape_index] the index of the [Shape3D] of the other [PhysicsBody3D] or [GridMap] used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape3D] of this RigidDynamicBody3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + [param local_shape_index] the index of the [Shape3D] of this RigidBody3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. </description> </signal> <signal name="body_shape_exited"> @@ -243,11 +243,11 @@ <param index="2" name="body_shape_index" type="int" /> <param index="3" name="local_shape_index" type="int" /> <description> - Emitted when the collision between one of this RigidDynamicBody3D's [Shape3D]s and another [PhysicsBody3D] or [GridMap]'s [Shape3D]s ends. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. + Emitted when the collision between one of this RigidBody3D's [Shape3D]s and another [PhysicsBody3D] or [GridMap]'s [Shape3D]s ends. Requires [member contact_monitor] to be set to [code]true[/code] and [member max_contacts_reported] to be set high enough to detect all the collisions. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape3D]s. [param body_rid] the [RID] of the other [PhysicsBody3D] or [MeshLibrary]'s [CollisionObject3D] used by the [PhysicsServer3D]. [GridMap]s are detected if the Meshes have [Shape3D]s. [param body] the [Node], if it exists in the tree, of the other [PhysicsBody3D] or [GridMap]. [param body_shape_index] the index of the [Shape3D] of the other [PhysicsBody3D] or [GridMap] used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]body.shape_owner_get_owner(body.shape_find_owner(body_shape_index))[/code]. - [param local_shape_index] the index of the [Shape3D] of this RigidDynamicBody3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. + [param local_shape_index] the index of the [Shape3D] of this RigidBody3D used by the [PhysicsServer3D]. Get the [CollisionShape3D] node with [code]self.shape_owner_get_owner(self.shape_find_owner(local_shape_index))[/code]. </description> </signal> <signal name="sleeping_state_changed"> diff --git a/doc/classes/Skeleton3D.xml b/doc/classes/Skeleton3D.xml index 75f7a37752..45ca330b87 100644 --- a/doc/classes/Skeleton3D.xml +++ b/doc/classes/Skeleton3D.xml @@ -231,7 +231,7 @@ <param index="0" name="exception" type="RID" /> <description> Adds a collision exception to the physical bone. - Works just like the [RigidDynamicBody3D] node. + Works just like the [RigidBody3D] node. </description> </method> <method name="physical_bones_remove_collision_exception"> @@ -239,7 +239,7 @@ <param index="0" name="exception" type="RID" /> <description> Removes a collision exception to the physical bone. - Works just like the [RigidDynamicBody3D] node. + Works just like the [RigidBody3D] node. </description> </method> <method name="physical_bones_start_simulation"> diff --git a/doc/classes/SoftDynamicBody3D.xml b/doc/classes/SoftBody3D.xml index 7f0a1d94d0..7006bca6f0 100644 --- a/doc/classes/SoftDynamicBody3D.xml +++ b/doc/classes/SoftBody3D.xml @@ -1,11 +1,11 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="SoftDynamicBody3D" inherits="MeshInstance3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="SoftBody3D" inherits="MeshInstance3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> A soft mesh physics body. </brief_description> <description> A deformable physics body. Used to create elastic or deformable objects such as cloth, rubber, or other flexible materials. - [b]Note:[/b] There are many known bugs in [SoftDynamicBody3D]. Therefore, it's not recommended to use them for things that can affect gameplay (such as a player character made entirely out of soft bodies). + [b]Note:[/b] There are many known bugs in [SoftBody3D]. Therefore, it's not recommended to use them for things that can affect gameplay (such as a player character made entirely out of soft bodies). </description> <tutorials> <link title="SoftBody">$DOCS_URL/tutorials/physics/soft_body.html</link> @@ -92,16 +92,16 @@ </methods> <members> <member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer" default="1"> - The physics layers this SoftDynamicBody3D [b]is in[/b]. Collision objects can exist in one or more of 32 different layers. See also [member collision_mask]. + The physics layers this SoftBody3D [b]is in[/b]. Collision objects can exist in one or more of 32 different layers. See also [member collision_mask]. [b]Note:[/b] Object A can detect a contact with object B only if object B is in any of the layers that object A scans. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> <member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="1"> - The physics layers this SoftDynamicBody3D [b]scans[/b]. Collision objects can scan one or more of 32 different layers. See also [member collision_layer]. + The physics layers this SoftBody3D [b]scans[/b]. Collision objects can scan one or more of 32 different layers. See also [member collision_layer]. [b]Note:[/b] Object A can detect a contact with object B only if object B is in any of the layers that object A scans. See [url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-and-masks]Collision layers and masks[/url] in the documentation for more information. </member> <member name="damping_coefficient" type="float" setter="set_damping_coefficient" getter="get_damping_coefficient" default="0.01"> </member> - <member name="disable_mode" type="int" setter="set_disable_mode" getter="get_disable_mode" enum="SoftDynamicBody3D.DisableMode" default="0"> + <member name="disable_mode" type="int" setter="set_disable_mode" getter="get_disable_mode" enum="SoftBody3D.DisableMode" default="0"> Defines the behavior in physics when [member Node.process_mode] is set to [constant Node.PROCESS_MODE_DISABLED]. See [enum DisableMode] for more details about the different modes. </member> <member name="drag_coefficient" type="float" setter="set_drag_coefficient" getter="get_drag_coefficient" default="0.0"> @@ -109,23 +109,23 @@ <member name="linear_stiffness" type="float" setter="set_linear_stiffness" getter="get_linear_stiffness" default="0.5"> </member> <member name="parent_collision_ignore" type="NodePath" setter="set_parent_collision_ignore" getter="get_parent_collision_ignore" default="NodePath("")"> - [NodePath] to a [CollisionObject3D] this SoftDynamicBody3D should avoid clipping. + [NodePath] to a [CollisionObject3D] this SoftBody3D should avoid clipping. </member> <member name="pressure_coefficient" type="float" setter="set_pressure_coefficient" getter="get_pressure_coefficient" default="0.0"> </member> <member name="ray_pickable" type="bool" setter="set_ray_pickable" getter="is_ray_pickable" default="true"> - If [code]true[/code], the [SoftDynamicBody3D] will respond to [RayCast3D]s. + If [code]true[/code], the [SoftBody3D] will respond to [RayCast3D]s. </member> <member name="simulation_precision" type="int" setter="set_simulation_precision" getter="get_simulation_precision" default="5"> Increasing this value will improve the resulting simulation, but can affect performance. Use with care. </member> <member name="total_mass" type="float" setter="set_total_mass" getter="get_total_mass" default="1.0"> - The SoftDynamicBody3D's mass. + The SoftBody3D's mass. </member> </members> <constants> <constant name="DISABLE_MODE_REMOVE" value="0" enum="DisableMode"> - When [member Node.process_mode] is set to [constant Node.PROCESS_MODE_DISABLED], remove from the physics simulation to stop all physics interactions with this [SoftDynamicBody3D]. + When [member Node.process_mode] is set to [constant Node.PROCESS_MODE_DISABLED], remove from the physics simulation to stop all physics interactions with this [SoftBody3D]. Automatically re-added to the physics simulation when the [Node] is processed again. </constant> <constant name="DISABLE_MODE_KEEP_ACTIVE" value="1" enum="DisableMode"> diff --git a/doc/classes/StaticBody2D.xml b/doc/classes/StaticBody2D.xml index e6e3559ae0..21c160b780 100644 --- a/doc/classes/StaticBody2D.xml +++ b/doc/classes/StaticBody2D.xml @@ -5,7 +5,7 @@ </brief_description> <description> Static body for 2D physics. - A static body is a simple body that can't be moved by external forces or contacts. It is ideal for implementing objects in the environment, such as walls or platforms. In contrast to [RigidDynamicBody2D], it doesn't consume any CPU resources as long as they don't move. + A static body is a simple body that can't be moved by external forces or contacts. It is ideal for implementing objects in the environment, such as walls or platforms. In contrast to [RigidBody2D], it doesn't consume any CPU resources as long as they don't move. They have extra functionalities to move and affect other bodies: [b]Static transform change:[/b] Static bodies can be moved by animation or script. In this case, they are just teleported and don't affect other bodies on their path. [b]Constant velocity:[/b] When [member constant_linear_velocity] or [member constant_angular_velocity] is set, static bodies don't move themselves but affect touching bodies as if they were moving. This is useful for simulating conveyor belts or conveyor wheels. diff --git a/doc/classes/StaticBody3D.xml b/doc/classes/StaticBody3D.xml index a29f5fc147..daa71d1168 100644 --- a/doc/classes/StaticBody3D.xml +++ b/doc/classes/StaticBody3D.xml @@ -5,7 +5,7 @@ </brief_description> <description> Static body for 3D physics. - A static body is a simple body that can't be moved by external forces or contacts. It is ideal for implementing objects in the environment, such as walls or platforms. In contrast to [RigidDynamicBody3D], it doesn't consume any CPU resources as long as they don't move. + A static body is a simple body that can't be moved by external forces or contacts. It is ideal for implementing objects in the environment, such as walls or platforms. In contrast to [RigidBody3D], it doesn't consume any CPU resources as long as they don't move. They have extra functionalities to move and affect other bodies: [b]Static transform change:[/b] Static bodies can be moved by animation or script. In this case, they are just teleported and don't affect other bodies on their path. [b]Constant velocity:[/b] When [member constant_linear_velocity] or [member constant_angular_velocity] is set, static bodies don't move themselves but affect touching bodies as if they were moving. This is useful for simulating conveyor belts or conveyor wheels. diff --git a/doc/classes/StreamPeerSSL.xml b/doc/classes/StreamPeerSSL.xml index 7fe9c54e3e..9d21b91416 100644 --- a/doc/classes/StreamPeerSSL.xml +++ b/doc/classes/StreamPeerSSL.xml @@ -29,7 +29,7 @@ <param index="3" name="valid_certificate" type="X509Certificate" default="null" /> <description> Connects to a peer using an underlying [StreamPeer] [param stream]. If [param validate_certs] is [code]true[/code], [StreamPeerSSL] will validate that the certificate presented by the peer matches the [param for_hostname]. - [b]Note:[/b] Specifying a custom [param valid_certificate] is not supported in HTML5 exports due to browsers restrictions. + [b]Note:[/b] Specifying a custom [param valid_certificate] is not supported in Web exports due to browsers restrictions. </description> </method> <method name="disconnect_from_stream"> diff --git a/doc/classes/TileMap.xml b/doc/classes/TileMap.xml index 5530759628..e76c696021 100644 --- a/doc/classes/TileMap.xml +++ b/doc/classes/TileMap.xml @@ -41,7 +41,7 @@ <return type="void" /> <param index="0" name="to_position" type="int" /> <description> - Adds a layer at the given position [param to_position] in the array. If [param to_position] is -1, adds it at the end of the array. + Adds a layer at the given position [param to_position] in the array. If [param to_position] is negative, the position is counted from the end, with [code]-1[/code] adding the layer at the end of the array. </description> </method> <method name="clear"> @@ -285,14 +285,16 @@ <param index="1" name="enabled" type="bool" /> <description> Enables or disables the layer [param layer]. A disabled layer is not processed at all (no rendering, no physics, etc...). + If [param layer] is negative, the layers are accessed from the last one. </description> </method> <method name="set_layer_modulate"> <return type="void" /> <param index="0" name="layer" type="int" /> - <param index="1" name="enabled" type="Color" /> + <param index="1" name="modulate" type="Color" /> <description> Sets a layer's color. It will be multiplied by tile's color and TileMap's modulate. + If [code]layer[/code] is negative, the layers are accessed from the last one. </description> </method> <method name="set_layer_name"> @@ -301,6 +303,7 @@ <param index="1" name="name" type="String" /> <description> Sets a layer's name. This is mostly useful in the editor. + If [code]layer[/code] is negative, the layers are accessed from the last one. </description> </method> <method name="set_layer_y_sort_enabled"> @@ -310,6 +313,7 @@ <description> Enables or disables a layer's Y-sorting. If a layer is Y-sorted, the layer will behave as a CanvasItem node where each of its tile gets Y-sorted. Y-sorted layers should usually be on different Z-index values than not Y-sorted layers, otherwise, each of those layer will be Y-sorted as whole with the Y-sorted one. This is usually an undesired behvaior. + If [code]layer[/code] is negative, the layers are accessed from the last one. </description> </method> <method name="set_layer_y_sort_origin"> @@ -319,6 +323,7 @@ <description> Sets a layer's Y-sort origin value. This Y-sort origin value is added to each tile's Y-sort origin value. This allows, for example, to fake a different height level on each layer. This can be useful for top-down view games. + If [code]layer[/code] is negative, the layers are accessed from the last one. </description> </method> <method name="set_layer_z_index"> @@ -327,6 +332,7 @@ <param index="1" name="z_index" type="int" /> <description> Sets a layers Z-index value. This Z-index is added to each tile's Z-index value. + If [code]layer[/code] is negative, the layers are accessed from the last one. </description> </method> <method name="set_pattern"> diff --git a/doc/classes/Vector2.xml b/doc/classes/Vector2.xml index 19fe2e2bfc..2197947126 100644 --- a/doc/classes/Vector2.xml +++ b/doc/classes/Vector2.xml @@ -304,7 +304,7 @@ <return type="Vector2" /> <param index="0" name="angle" type="float" /> <description> - Returns the vector rotated by [param angle] (in radians). See also [method @GlobalScope.deg2rad]. + Returns the vector rotated by [param angle] (in radians). See also [method @GlobalScope.deg_to_rad]. </description> </method> <method name="round" qualifiers="const"> diff --git a/doc/classes/VehicleBody3D.xml b/doc/classes/VehicleBody3D.xml index 08309a8ecc..e1689133de 100644 --- a/doc/classes/VehicleBody3D.xml +++ b/doc/classes/VehicleBody3D.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="UTF-8" ?> -<class name="VehicleBody3D" inherits="RigidDynamicBody3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> +<class name="VehicleBody3D" inherits="RigidBody3D" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> <brief_description> Physics body that simulates the behavior of a car. </brief_description> @@ -13,14 +13,14 @@ </tutorials> <members> <member name="brake" type="float" setter="set_brake" getter="get_brake" default="0.0"> - Slows down the vehicle by applying a braking force. The vehicle is only slowed down if the wheels are in contact with a surface. The force you need to apply to adequately slow down your vehicle depends on the [member RigidDynamicBody3D.mass] of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 30 range for hard braking. + Slows down the vehicle by applying a braking force. The vehicle is only slowed down if the wheels are in contact with a surface. The force you need to apply to adequately slow down your vehicle depends on the [member RigidBody3D.mass] of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 30 range for hard braking. </member> <member name="engine_force" type="float" setter="set_engine_force" getter="get_engine_force" default="0.0"> - Accelerates the vehicle by applying an engine force. The vehicle is only sped up if the wheels that have [member VehicleWheel3D.use_as_traction] set to [code]true[/code] and are in contact with a surface. The [member RigidDynamicBody3D.mass] of the vehicle has an effect on the acceleration of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 range for acceleration. + Accelerates the vehicle by applying an engine force. The vehicle is only sped up if the wheels that have [member VehicleWheel3D.use_as_traction] set to [code]true[/code] and are in contact with a surface. The [member RigidBody3D.mass] of the vehicle has an effect on the acceleration of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 range for acceleration. [b]Note:[/b] The simulation does not take the effect of gears into account, you will need to add logic for this if you wish to simulate gears. A negative value will result in the vehicle reversing. </member> - <member name="mass" type="float" setter="set_mass" getter="get_mass" overrides="RigidDynamicBody3D" default="40.0" /> + <member name="mass" type="float" setter="set_mass" getter="get_mass" overrides="RigidBody3D" default="40.0" /> <member name="steering" type="float" setter="set_steering" getter="get_steering" default="0.0"> The steering angle for the vehicle, in radians. Setting this to a non-zero value will result in the vehicle turning when it's moving. Wheels that have [member VehicleWheel3D.use_as_steering] set to [code]true[/code] will automatically be rotated. </member> diff --git a/doc/classes/VehicleWheel3D.xml b/doc/classes/VehicleWheel3D.xml index ac126f824e..827c7e8f57 100644 --- a/doc/classes/VehicleWheel3D.xml +++ b/doc/classes/VehicleWheel3D.xml @@ -39,7 +39,7 @@ </methods> <members> <member name="brake" type="float" setter="set_brake" getter="get_brake" default="0.0"> - Slows down the wheel by applying a braking force. The wheel is only slowed down if it is in contact with a surface. The force you need to apply to adequately slow down your vehicle depends on the [member RigidDynamicBody3D.mass] of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 30 range for hard braking. + Slows down the wheel by applying a braking force. The wheel is only slowed down if it is in contact with a surface. The force you need to apply to adequately slow down your vehicle depends on the [member RigidBody3D.mass] of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 30 range for hard braking. </member> <member name="damping_compression" type="float" setter="set_damping_compression" getter="get_damping_compression" default="0.83"> The damping applied to the spring when the spring is being compressed. This value should be between 0.0 (no damping) and 1.0. A value of 0.0 means the car will keep bouncing as the spring keeps its energy. A good value for this is around 0.3 for a normal car, 0.5 for a race car. @@ -48,7 +48,7 @@ The damping applied to the spring when relaxing. This value should be between 0.0 (no damping) and 1.0. This value should always be slightly higher than the [member damping_compression] property. For a [member damping_compression] value of 0.3, try a relaxation value of 0.5. </member> <member name="engine_force" type="float" setter="set_engine_force" getter="get_engine_force" default="0.0"> - Accelerates the wheel by applying an engine force. The wheel is only sped up if it is in contact with a surface. The [member RigidDynamicBody3D.mass] of the vehicle has an effect on the acceleration of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 range for acceleration. + Accelerates the wheel by applying an engine force. The wheel is only sped up if it is in contact with a surface. The [member RigidBody3D.mass] of the vehicle has an effect on the acceleration of the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - 50 range for acceleration. [b]Note:[/b] The simulation does not take the effect of gears into account, you will need to add logic for this if you wish to simulate gears. A negative value will result in the wheel reversing. </member> @@ -56,7 +56,7 @@ The steering angle for the wheel, in radians. Setting this to a non-zero value will result in the vehicle turning when it's moving. </member> <member name="suspension_max_force" type="float" setter="set_suspension_max_force" getter="get_suspension_max_force" default="6000.0"> - The maximum force the spring can resist. This value should be higher than a quarter of the [member RigidDynamicBody3D.mass] of the [VehicleBody3D] or the spring will not carry the weight of the vehicle. Good results are often obtained by a value that is about 3× to 4× this number. + The maximum force the spring can resist. This value should be higher than a quarter of the [member RigidBody3D.mass] of the [VehicleBody3D] or the spring will not carry the weight of the vehicle. Good results are often obtained by a value that is about 3× to 4× this number. </member> <member name="suspension_stiffness" type="float" setter="set_suspension_stiffness" getter="get_suspension_stiffness" default="5.88"> This value defines the stiffness of the suspension. Use a value lower than 50 for an off-road car, a value between 50 and 100 for a race car and try something around 200 for something like a Formula 1 car. diff --git a/doc/classes/VideoStreamPlayer.xml b/doc/classes/VideoStreamPlayer.xml index f6594ff9e7..2774f1fb42 100644 --- a/doc/classes/VideoStreamPlayer.xml +++ b/doc/classes/VideoStreamPlayer.xml @@ -7,7 +7,7 @@ Control node for playing video streams using [VideoStream] resources. Supported video formats are [url=https://www.theora.org/]Ogg Theora[/url] ([code].ogv[/code], [VideoStreamTheora]) and any format exposed via a GDExtension plugin. [b]Note:[/b] Due to a bug, VideoStreamPlayer does not support localization remapping yet. - [b]Warning:[/b] On HTML5, video playback [i]will[/i] perform poorly due to missing architecture-specific assembly optimizations. + [b]Warning:[/b] On Web, video playback [i]will[/i] perform poorly due to missing architecture-specific assembly optimizations. </description> <tutorials> </tutorials> diff --git a/doc/classes/Viewport.xml b/doc/classes/Viewport.xml index 93e7e20f5a..0071834ccd 100644 --- a/doc/classes/Viewport.xml +++ b/doc/classes/Viewport.xml @@ -266,7 +266,8 @@ <member name="snap_2d_vertices_to_pixel" type="bool" setter="set_snap_2d_vertices_to_pixel" getter="is_snap_2d_vertices_to_pixel_enabled" default="false"> </member> <member name="texture_mipmap_bias" type="float" setter="set_texture_mipmap_bias" getter="get_texture_mipmap_bias" default="0.0"> - Affects the final texture sharpness by reading from a lower or higher mipmap (also called "texture LOD bias"). Negative values make mipmapped textures sharper but grainier when viewed at a distance, while positive values make mipmapped textures blurrier (even when up close). To get sharper textures at a distance without introducing too much graininess, set this between [code]-0.75[/code] and [code]0.0[/code]. Enabling temporal antialiasing ([member ProjectSettings.rendering/anti_aliasing/quality/use_taa]) can help reduce the graininess visible when using negative mipmap bias. + Affects the final texture sharpness by reading from a lower or higher mipmap (also called "texture LOD bias"). Negative values make mipmapped textures sharper but grainier when viewed at a distance, while positive values make mipmapped textures blurrier (even when up close). + Enabling temporal antialiasing ([member use_taa]) will automatically apply a [code]-0.5[/code] offset to this value, while enabling FXAA ([member screen_space_aa]) will automatically apply a [code]-0.25[/code] offset to this value. If both TAA and FXAA are enbled at the same time, an offset of [code]-0.75[/code] is applied to this value. [b]Note:[/b] If [member scaling_3d_scale] is lower than [code]1.0[/code] (exclusive), [member texture_mipmap_bias] is used to adjust the automatic mipmap bias which is calculated internally based on the scale factor. The formula for this is [code]log2(scaling_3d_scale) + mipmap_bias[/code]. To control this property on the root viewport, set the [member ProjectSettings.rendering/textures/default_filters/texture_mipmap_bias] project setting. </member> diff --git a/doc/classes/VisibleOnScreenEnabler3D.xml b/doc/classes/VisibleOnScreenEnabler3D.xml index 5e03870005..a3f925ed3a 100644 --- a/doc/classes/VisibleOnScreenEnabler3D.xml +++ b/doc/classes/VisibleOnScreenEnabler3D.xml @@ -4,7 +4,7 @@ Enables certain nodes only when approximately visible. </brief_description> <description> - The VisibleOnScreenEnabler3D will disable [RigidDynamicBody3D] and [AnimationPlayer] nodes when they are not visible. It will only affect other nodes within the same scene as the VisibleOnScreenEnabler3D itself. + The VisibleOnScreenEnabler3D will disable [RigidBody3D] and [AnimationPlayer] nodes when they are not visible. It will only affect other nodes within the same scene as the VisibleOnScreenEnabler3D itself. If you just want to receive notifications, use [VisibleOnScreenNotifier3D] instead. [b]Note:[/b] VisibleOnScreenEnabler3D uses an approximate heuristic for performance reasons. It doesn't take walls and other occlusion into account. The heuristic is an implementation detail and may change in future versions. If you need precise visibility checking, use another method such as adding an [Area3D] node as a child of a [Camera3D] node and/or [method Vector3.dot]. [b]Note:[/b] VisibleOnScreenEnabler3D will not affect nodes added after scene initialization. diff --git a/doc/classes/VisualShaderNodeDistanceFade.xml b/doc/classes/VisualShaderNodeDistanceFade.xml new file mode 100644 index 0000000000..8ea0857776 --- /dev/null +++ b/doc/classes/VisualShaderNodeDistanceFade.xml @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeDistanceFade" inherits="VisualShaderNode" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/VisualShaderNodeLinearSceneDepth.xml b/doc/classes/VisualShaderNodeLinearSceneDepth.xml new file mode 100644 index 0000000000..fa8c01ac0a --- /dev/null +++ b/doc/classes/VisualShaderNodeLinearSceneDepth.xml @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeLinearSceneDepth" inherits="VisualShaderNode" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/VisualShaderNodeProximityFade.xml b/doc/classes/VisualShaderNodeProximityFade.xml new file mode 100644 index 0000000000..25051eed71 --- /dev/null +++ b/doc/classes/VisualShaderNodeProximityFade.xml @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeProximityFade" inherits="VisualShaderNode" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/VisualShaderNodeRandomRange.xml b/doc/classes/VisualShaderNodeRandomRange.xml new file mode 100644 index 0000000000..adc83d808c --- /dev/null +++ b/doc/classes/VisualShaderNodeRandomRange.xml @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeRandomRange" inherits="VisualShaderNode" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/VisualShaderNodeRemap.xml b/doc/classes/VisualShaderNodeRemap.xml new file mode 100644 index 0000000000..5a73a76e7f --- /dev/null +++ b/doc/classes/VisualShaderNodeRemap.xml @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeRemap" inherits="VisualShaderNode" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/VisualShaderNodeUVPolarCoord.xml b/doc/classes/VisualShaderNodeUVPolarCoord.xml new file mode 100644 index 0000000000..8582939db3 --- /dev/null +++ b/doc/classes/VisualShaderNodeUVPolarCoord.xml @@ -0,0 +1,9 @@ +<?xml version="1.0" encoding="UTF-8" ?> +<class name="VisualShaderNodeUVPolarCoord" inherits="VisualShaderNode" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd"> + <brief_description> + </brief_description> + <description> + </description> + <tutorials> + </tutorials> +</class> diff --git a/doc/classes/Window.xml b/doc/classes/Window.xml index c3002a8a9f..2c0a694ef9 100644 --- a/doc/classes/Window.xml +++ b/doc/classes/Window.xml @@ -342,6 +342,9 @@ If [code]true[/code], the [Window] will be in exclusive mode. Exclusive windows are always on top of their parent and will block all input going to the parent [Window]. Needs [member transient] enabled to work. </member> + <member name="extend_to_title" type="bool" setter="set_flag" getter="get_flag" default="false"> + If [code]true[/code], the [Window] contents is expanded to the full size of the window, window title bar is transparent. + </member> <member name="max_size" type="Vector2i" setter="set_max_size" getter="get_max_size" default="Vector2i(0, 0)"> If non-zero, the [Window] can't be resized to be bigger than this size. [b]Note:[/b] This property will be ignored if the value is lower than [member min_size]. @@ -510,7 +513,10 @@ <constant name="FLAG_POPUP" value="5" enum="Flags"> Whether the window is popup or a regular window. Set with [member popup_window]. </constant> - <constant name="FLAG_MAX" value="6" enum="Flags"> + <constant name="FLAG_EXTEND_TO_TITLE" value="6" enum="Flags"> + Window contents is expanded to the full size of the window, window title bar is transparent. + </constant> + <constant name="FLAG_MAX" value="7" enum="Flags"> Max value of the [enum Flags]. </constant> <constant name="CONTENT_SCALE_MODE_DISABLED" value="0" enum="ContentScaleMode"> diff --git a/doc/tools/make_rst.py b/doc/tools/make_rst.py index 519554e026..bc50e39812 100755 --- a/doc/tools/make_rst.py +++ b/doc/tools/make_rst.py @@ -878,7 +878,7 @@ def make_rst_class(class_def: ClassDef, state: State, dry_run: bool, output_dir: f.write("----\n\n") if i == 0: - f.write(".. _class_{}_annotation_{}:\n\n".format(class_name, m.name.strip("@"))) + f.write(".. _class_{}_annotation_{}:\n\n".format(class_name, m.name)) _, signature = make_method_signature(class_def, m, "", state) f.write("- {}\n\n".format(signature)) @@ -1337,8 +1337,10 @@ def format_text_block( # Cross-references to items in this or other class documentation pages. elif is_in_tagset(cmd, RESERVED_CROSSLINK_TAGS): + link_type: str = "" link_target: str = "" if space_pos >= 0: + link_type = tag_text[:space_pos] link_target = tag_text[space_pos + 1 :].strip() if link_target == "": @@ -1350,11 +1352,13 @@ def format_text_block( else: if ( cmd.startswith("method") + or cmd.startswith("constructor") + or cmd.startswith("operator") or cmd.startswith("member") or cmd.startswith("signal") - or cmd.startswith("constant") or cmd.startswith("annotation") or cmd.startswith("theme_item") + or cmd.startswith("constant") ): if link_target.find(".") != -1: ss = link_target.split(".") @@ -1371,48 +1375,62 @@ def format_text_block( class_param = state.current_class method_param = link_target - ref_type = "" + # Default to the tag command name. This works by default for most tags, + # but member and theme_item have special cases. + ref_type = "_{}".format(link_type) + if link_type == "member": + ref_type = "_property" + if class_param in state.classes: class_def = state.classes[class_param] - if cmd.startswith("constructor"): - if method_param not in class_def.constructors: - print_error( - '{}.xml: Unresolved constructor reference "{}" in {}.'.format( - state.current_class, link_target, context_name - ), - state, - ) - ref_type = "_constructor" - elif cmd.startswith("method"): - if method_param not in class_def.methods: - print_error( - '{}.xml: Unresolved method reference "{}" in {}.'.format( - state.current_class, link_target, context_name - ), - state, - ) - ref_type = "_method" + if cmd.startswith("method") and method_param not in class_def.methods: + print_error( + '{}.xml: Unresolved method reference "{}" in {}.'.format( + state.current_class, link_target, context_name + ), + state, + ) - elif cmd.startswith("operator"): - if method_param not in class_def.operators: - print_error( - '{}.xml: Unresolved operator reference "{}" in {}.'.format( - state.current_class, link_target, context_name - ), - state, - ) - ref_type = "_operator" + elif cmd.startswith("constructor") and method_param not in class_def.constructors: + print_error( + '{}.xml: Unresolved constructor reference "{}" in {}.'.format( + state.current_class, link_target, context_name + ), + state, + ) - elif cmd.startswith("member"): - if method_param not in class_def.properties: - print_error( - '{}.xml: Unresolved member reference "{}" in {}.'.format( - state.current_class, link_target, context_name - ), - state, - ) - ref_type = "_property" + elif cmd.startswith("operator") and method_param not in class_def.operators: + print_error( + '{}.xml: Unresolved operator reference "{}" in {}.'.format( + state.current_class, link_target, context_name + ), + state, + ) + + elif cmd.startswith("member") and method_param not in class_def.properties: + print_error( + '{}.xml: Unresolved member reference "{}" in {}.'.format( + state.current_class, link_target, context_name + ), + state, + ) + + elif cmd.startswith("signal") and method_param not in class_def.signals: + print_error( + '{}.xml: Unresolved signal reference "{}" in {}.'.format( + state.current_class, link_target, context_name + ), + state, + ) + + elif cmd.startswith("annotation") and method_param not in class_def.annotations: + print_error( + '{}.xml: Unresolved annotation reference "{}" in {}.'.format( + state.current_class, link_target, context_name + ), + state, + ) elif cmd.startswith("theme_item"): if method_param not in class_def.theme_items: @@ -1422,27 +1440,9 @@ def format_text_block( ), state, ) - ref_type = "_theme_{}".format(class_def.theme_items[method_param].data_name) - - elif cmd.startswith("signal"): - if method_param not in class_def.signals: - print_error( - '{}.xml: Unresolved signal reference "{}" in {}.'.format( - state.current_class, link_target, context_name - ), - state, - ) - ref_type = "_signal" - - elif cmd.startswith("annotation"): - if method_param not in class_def.annotations: - print_error( - '{}.xml: Unresolved annotation reference "{}" in {}.'.format( - state.current_class, link_target, context_name - ), - state, - ) - ref_type = "_annotation" + else: + # Needs theme data type to be properly linked, which we cannot get without a class. + ref_type = "_theme_{}".format(class_def.theme_items[method_param].data_name) elif cmd.startswith("constant"): found = False @@ -1473,7 +1473,6 @@ def format_text_block( ), state, ) - ref_type = "_constant" else: print_error( |